Toshiba e-STUDIO2008A Service Manual page 127

4.1.16 Front cover switch (SW4)
(1) Remove the receiving tray.
 P. 4-2 "4.1.3 Receiving tray"
(2) Disconnect 1 connector and take off the front
cover switch [1].
4.1.17 Front cover interlock switch (SW2)
(1) Remove the front cover.
 P. 4-1 "4.1.1 Front cover"
(2) Remove the receiving tray.
 P. 4-2 "4.1.3 Receiving tray"
(3) Remove the right front cover.
 P. 4-4 "4.1.9 Right front cover"
(4) Remove the front right cover.
 P. 4-6 "4.1.13 Front right cover"
(5) Remove the developer unit.
 P. 4-102 "4.8.1 Developer unit"
(6) Remove 5 screws and take off the inner
cover [1].
(7) Disconnect 2 connectors and remove 2
screws [2].
(8) Remove the front cover interlock switch [3].
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-18
Fig. 4-19
Fig. 4-20
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 7
DISASSEMBLY AND REPLACEMENT
4