Toshiba e-STUDIO2008A Service Manual page 294

(11) Remove the reversing automatic document
feeder by sliding it toward the rear side.
4.13.3 KD-1058 (Paper Feed Pedestal)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove 1 screw and take off the cover.
(5) Remove 1 screw and take off the ground
cable. Disconnect 1 connector.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 174
Fig. 4-471
Fig. 4-472
Fig. 4-473