Toshiba e-STUDIO2008A Service Manual page 358

5.13 [73 Assist mode]
5.13.1 Overview
This mode is available only when the security HDD (ADI-HDD) is mounted in the equipment. It enables
you to check the type of the mounted HDD, revert the ADI-HDD to the factory default or remove keys.
The Functions in this mode are below.
Functions
Clear Error Flag in Software Installation
Format Root Partition
Format HDD
Clear SRAM
Key Backup/Restore
Erase HDD Securely
Erase SRAM Securely
Clear Service Tech Password
5.13.2 Operation procedure
(1) Perform [HS-73] by pressing the [73 Assist mode] icon.
The following screen is displayed.
(2) Press the icon to operate.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
Content
Clearing update error flag
Formatting data storage partition
Creating HDD partition
Formatting SRAM data
Backing up/restoring encryption key and license
Erasing HDD securely
Erasing SRAM securely
Clearing service tech password
Fig.5-25
© 2015 TOSHIBA TEC CORPORATION All rights reserved
5 - 40