Toshiba e-STUDIO2008A Service Manual page 316

4.13.11 MJ-5014 (Job Separator) <20ppm/25ppm/30ppm>
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove the tray.
(5) Open the side cover. Remove 1 screw and
take off the connecting port cover.
(6) Disconnect 2 connectors.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 196
Fig. 4-537
Fig. 4-538
Fig. 4-539