Toshiba e-STUDIO2008A Service Manual page 312

(14) Remove 2 screws. Lift up the hole punch unit
and take it off.
4.13.10 MJ-6105 with MJ-1109 (Hole punch unit)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove the connector cover.
(5) Disconnect the connector.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 192
Fig. 4-525
Fig. 4-526
Fig. 4-527