Toshiba e-STUDIO2008A Service Manual page 364

[B] Remove Key
Select this to reuse the ADI-HDD as well as the equipment.
When this item is selected, image data in the HDD are deleted.
This operation requires approx. 20 minutes since the partition must be rebuilt.
The following screen is displayed when the [Remove Key] icon is pressed.
HDD Assist Mode (4C)
Current HDD Type :
Select Menu
Revert
Factory Initial
Status HDD
Press [OK] to carry out the operation.
When the operation is finished, the result appears on the menu.
Notes:
After this operation, the equipment becomes reusable without reinstalling the firmware.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
System Firmware Version: XXXXXX
Confirmation Screen
Remove
Key
Are you sure ???
Cancel
Fig.5-31
5 - 46
OK
Cancel
© 2015 TOSHIBA TEC CORPORATION All rights reserved