Toshiba e-STUDIO2008A Service Manual page 176

(8) Remove the transport roller [5] by sliding the
bushing [6] toward the front side.
(9) Remove the 2 bushings [7], 1 clip [8], 1 E-
ring [9] and 1 gear [10].
4.5.12 Feed cover opening/closing switch (SW10)
(1) Remove the feed cover.
 P. 4-53 "4.5.10 Feed cover"
(2) Remove 4 screws. Release 3 latches [1],
and take off the cover [2].
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Fig. 4-151
Fig. 4-152
Fig. 4-153
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 56