Toshiba e-Studio3005AC Software Installation Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. All in One Printer
  5. E-STUDIO3005AC
  6. Software installation manual

Toshiba e-Studio3005AC Software Installation Manual

E-studio5005ac series; e-studio5008a series; e-studio7506ac series; e-studio8508a series. multifunctional digital colog system / multifunctional digital systems.
Hide thumbs Also See for e-Studio3005AC:
Table of Contents

Advertisement

Quick Links

MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS /
MULTIFUNCTIONAL DIGITAL SYSTEMS
Software Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Toshiba e-Studio3005AC

Summary of Contents for Toshiba e-Studio3005AC

  • Page 1 MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS / MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide...
  • Page 2 ©2016 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC.

  • Page 3: Preface

    Preface Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual explains the instructions for installing client software. Read this manual before using the functions.  How to read this manual  Symbols in this manual In this manual, some important items are described with the symbols shown below.

  • Page 4: End User Software License Agreement

    WHERE YOU OBTAINED IT. GRANT OF LICENSE: This is a legal agreement between you, the end-user (“You”), and TOSHIBA TEC Corporation (“TTEC”). This software, fonts (including their typefaces) and related documentation (“Software”) is licensed for use with TTEC MFP on which it was installed to the designated device you use (“System”) in accordance with the terms contained in this License...
  • Page 5 CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TTEC AND ITS SUPPLIERS AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT. Contractor/Manufacturer is TOSHIBA TEC Corporation, 1-11-1, Osaki, Shinagawa-ku, Tokyo, 141-8562, Japan END USER SOFTWARE LICENSE AGREEMENT 5...
  • Page 6 6 END USER SOFTWARE LICENSE AGREEMENT...

  • Page 7: Table Of Contents

    RECOMMENDED INSTALLATION Procedure for Recommended Installation ..................... 26 Precautions for Changing the SNMP Settings ..................30 When SNMP V1 and V2 are configured for your TOSHIBA MFP ................30 When SNMP V3 is configured for your TOSHIBA MFP....................31 Chapter 3 INSTALLING PRINTER DRIVERS FOR WINDOWS Before Installation ..........................
  • Page 8 About client software for Mac OS..........................86 System requirements ..............................86 Installing the Printer on Mac OS ......................87 Installing the Mac OS PPD file ........................... 87 Configuring the printer .............................. 90 Uninstalling the Mac OS PPD File ......................97 Chapter 5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux Setting Up the UNIX/Linux Filters ......................100...
  • Page 9 Chapter 10 CAUTIONS AND RELATED MESSAGES REGARDING INSTALLATION (Windows) Cautions before installation ........................158 Messages that may appear in installation .....................159 Cautions after installation ........................160 INDEX .................................161 CONTENTS 9...
  • Page 10 10 CONTENTS...

  • Page 11: Overview

    OVERVIEW This chapter provides an overview of the software installation. About the Install Disc ......................12 For Windows.................................12 For Mac OS................................14 For UNIX/Linux ..............................14 Contents of Installer ......................16 Precautions for Using Firewall Software................17 Downloading Software From TopAccess ................18 Downloading installer for Windows........................18 Downloading Mac OS PPD files ...........................20 Downloading UNIX/Linux filters..........................21 Setting Up NetWare Print Server..................22...

  • Page 12: About The Install Disc

    About the Install Disc  For Windows The contents of the Install Disc: Client software installer [Install Disc]:\e-STUDIO\Setup.exe This is the setup program to install the Universal Printer 2 driver and other client software on your computer. Universal Printer 2 drivers The setup files for installing the Universal Printer 2 driver for each language version are included in the following folder: They allow you to install the driver on Windows Vista or later / Windows Server 2008 or later.
  • Page 13 They allow you to install the driver on Windows Vista or later / Windows Server 2008 or later. [Install Disc]:\Client\WIA\ TOSHIBA Office Scan Add-In tool This Add-In tool allows utilizing the Remote Scan driver, TWAIN driver and WIA driver in Microsoft Office 2013 and Microsoft Office 2016.

  • Page 14: For Mac Os

    1.OVERVIEW  For Mac OS The contents of the Install Disc: Mac OS PPD files The PPD file and plug-ins are included in the following folder, which are used for Mac OS X 10.6.8 or later:  [Install Disc]:MacPPD/OSX10_6- These plug-ins are used for Mac OS X 10.6.8 or later. ...
  • Page 15 1.OVERVIEW CUPS PPD file The PPD file to enable printing from CUPS is included in the following folder: Choose the appropriate file depending on the model to be used.  Color MFP - [Install Disc]/Admin/Color_Unix_Linux/CUPS/Usa/2-sided_default/ This PPD file enables to set 2-sided printing by default. - [Install Disc]/Admin/Color_Unix_Linux/CUPS/Usa/normal/ This PPD file enables to set 1-sided printing by default.

  • Page 16: Contents Of Installer

    The following software can be installed by the Installer in the Install Disc. Printer drivers (Printing function) Printer drivers are software components that enable application programs to interact with the TOSHIBA MFP. The TOSHIBA MFP comes with three printer drivers, Universal Printer 2 (PCL6, PostScript), Universal PS3 (PostScript) and Universal XPS printer drivers.

  • Page 17: Precautions For Using Firewall Software

    Precautions for Using Firewall Software When firewall software is used on Windows computers, installation may not be performed since network communication between this equipment and the computers is blocked by firewall software. Check if firewall software is used before installation, and follow the directions of your network administrator if it is used.

  • Page 18: Downloading Software From Topaccess

    Downloading Software From TopAccess If the system administrator has uploaded the software to the TOSHIBA MFP, you can download the software from TopAccess to install them on your computer. The following software can be downloaded from TopAccess.  Installer for Windows ...
  • Page 19 1.OVERVIEW Click the [Install Client1] link to download the installer file. Links for installing the printer drivers are also provided on this page. For instructions on how to install them from TopAccess, see the following page:  P.52 “Installing the printer drivers from TopAccess” Download the installer file on your desktop by following the prompts.

  • Page 20: Downloading Mac Os Ppd Files

    1.OVERVIEW  Downloading Mac OS PPD files In TopAccess, click the [Install Software] link at the bottom of the screen. Click the [Macintosh PPD Files] link. The software components list is displayed. Click the File Name link that you want to download. TOSHIBA_xxxxxMFP.dmg.gz —...

  • Page 21: Downloading Unix/Linux Filters

    1.OVERVIEW  Downloading UNIX/Linux filters In TopAccess, click the [Install Software] link at the bottom of the screen. Click the [Unix Filters] link. The software components list is displayed. Click the UNIX/Linux filter link that you want to install. Download the UNIX/Linux tar file containing the UNIX/Linux filters on your desktop by following the prompts.

  • Page 22: Setting Up Netware Print Server

    Setting Up NetWare Print Server This equipment supports the following Novell printing services:  NetWare 6.5 iPrint mode This chapter provides an overview of how to set up this equipment as a Novell Network Printer, Print Server, or NDPS Printer Agent. For more detailed information, refer to your Novell documentation. ...
  • Page 23 1.OVERVIEW  Enabling Novell iPrint After enabling DNS on the Printer Services Manager, enable the Novell iPrint using the Novell iManager.  To do this, Novell iManager must be installed on your NetWare print server. For information about installing iManager, see the documentation for Novell iManager that is provided by Novell, Inc. ...

  • Page 24: Configuring The Lpr Connection

    1.OVERVIEW  Configuring the LPR connection Select [Create Printer]. The dialog box for creating the printer appears. Specify the [Printer name] and [Print Manager name] options, select [Novell Gateway] in the [Gateway Type] list, and then click [Next]. The dialog box for configuring Novell Gateway appears. Enter the IP address of this equipment in [Host IP address], specify “PORT_PASSTHROUGH”...

  • Page 25: Recommended Installation

    RECOMMENDED INSTALLATION This chapter describes the recommended installation of the Installer. Procedure for Recommended Installation ................26 Precautions for Changing the SNMP Settings ..............30...

  • Page 26: Procedure For Recommended Installation

    Procedure for Recommended Installation Install the software using the recommended installation when you want to do so for the Universal Printer 2 driver and other client software on a Windows computer. To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation and uninstallation of client software.
  • Page 27 Confirm the list of the software to install and click [Install].  If the following message appears, click [Continue]. See step 7 or later in the following section to continue the installation:  P.41 “If your TOSHIBA MFP is not found” Procedure for Recommended Installation 27...
  • Page 28 [SNMP Settings] If the SNMP settings are not the same in your TOSHIBA MFP and the [SNMP Settings] dialog box, you cannot find your TOSHIBA MFP. Verify the correct SNMP settings on the [SNMP Settings] dialog box and change the settings, if needed.
  • Page 29 2.RECOMMENDED INSTALLATION 3. Click [OK]. When SNMP V1, V2, and V3 are configured for your TOSHIBA MFP, perform both of the above settings. A list of the discovered printers is displayed. Then select this equipment on the list and then click [OK].

  • Page 30: Precautions For Changing The Snmp Settings

    When the SNMP community name or user information is used for authenticating users on your TOSHIBA MFP, the SNMP settings must be the same in your TOSHIBA MFP and the [SNMP Settings] dialog box as shown below in order to print or send jobs normally.

  • Page 31: When Snmp V3 Is Configured For Your Toshiba Mfp

     Make sure that the value of [SNMP Device Index] in the [Port Settings] tab is set to "1". If it is "0", no communication can be made with the device.  When the SMB port is used, the Read Write Community names must be the same in your TOSHIBA MFP and the [SNMP Settings] dialog box.
  • Page 32 [SNMP Settings] dialog box SNMP V3 User Information must be the same in your TOSHIBA MFP and the [SNMP Settings] dialog box. The SNMP settings also must be the same in your TOSHIBA MFP and the applications (TWAIN driver, File Downloader, and AddressBook Viewer) included in the Install Disc.
  • Page 33 INSTALLING PRINTER DRIVERS FOR WINDOWS This chapter provides instructions on how to install printer drivers for Windows. Before Installation......................34 Type of printer drivers ............................34 System requirements ............................34 About installation procedure ..........................35 Installing the Printer Drivers .....................36 Installing the printer drivers by using Software Installer ..................37 Installing the printer drivers by using the individual installers.................46 Installing the printer drivers from TopAccess ....................52 Installing the printer drivers from the equipment’s shared folder ..............54...

  • Page 34: Before Installation

    Before Installation This section will help you to plan an installation suited to your environment. Before installing the printer drivers, read this section. When the same printer drivers have been installed previously Before updating the printer drivers, delete the existing printer drivers. ...

  • Page 35: About Installation Procedure

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  About installation procedure Install the software according to your connection environment and the print method.: Raw TCP/LPR printing This equipment supports the Raw TCP and LPR printing via TCP/IP. When this equipment is connected to your computer in a TCP/IP network, Raw TCP/LPR printing may be most suitable.

  • Page 36: Installing The Printer Drivers

     Installing the printer drivers from TopAccess If the Universal Printer 2 driver, Universal PS3 printer driver, and Universal XPS printer driver have been uploaded to the TOSHIBA MFP, you can install the preferred printer driver from TopAccess.  P.52 “Installing the printer drivers from TopAccess”...

  • Page 37: Installing The Printer Drivers By Using Software Installer

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Installing the printer drivers by using Software Installer Perform installation corresponding to your Windows computer. To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation and uninstallation of client software. Insert the Install Disc into the disc drive.
  • Page 38 Select the software items which you want to install, and then click [Next]. Confirm the list of the software to install and click [Install]. When you want to verify and/or change the SNMP settings to find the target TOSHIBA MFPs, see step 4 in the following section: ...
  • Page 39  To select a temporary local port and then configure the Raw TCP/LPR port, click [Continue]. Then follow the procedure as described in the following page:  P.41 “If your TOSHIBA MFP is not found”  If you know the IP address of this equipment, you can specify a printer port with the direct entry from the keyboard.
  • Page 40 3.INSTALLING PRINTER DRIVERS FOR WINDOWS A list for the discovered printers is displayed. Then select this equipment on the list and then click [OK]. The TCP/IP port is created. Searching may take a while depending on the Windows OS or network environment. Confirm that the installation is completed, and then click [Finish].
  • Page 41 3.INSTALLING PRINTER DRIVERS FOR WINDOWS If your TOSHIBA MFP is not found If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port and then configuring the Raw TCP/LPR port. If this equipment is not discovered over the network after the installation is started, a dialog box indicating this appears.
  • Page 42 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Open the printer driver properties dialog box.  When using Windows 7 or later / Windows Server 2012 or later Select the installed printer driver and right-click to make the menu appear, then click [Printer properties]. ...
  • Page 43 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Enter the IP address of this equipment in the [Printer Name or IP Address] box and click [Next].  If your network uses a DNS or WINS server, enter the printer name of this equipment provided from DNS or WINS in the [Printer Name or IP Address] box.
  • Page 44 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Make sure the created Raw TCP or LPR port is checked in the [Print to the following port(s)] list. When the LPD Print setting is enabled, you can also configure LPR printing. When you want to configure LPR printing, follow the procedure below.
  • Page 45 3.INSTALLING PRINTER DRIVERS FOR WINDOWS  SMB printing Install a printer driver by specifying the SMB port manually.  Before starting the configuration, make sure that this equipment is connected to a network and also that its power is turned ON. ...

  • Page 46: Installing The Printer Drivers By Using The Individual Installers

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Installing the printer drivers by using the individual installers Perform installation corresponding to your Windows computer. To perform installation, you must log onto Windows with the “Administrator” account. Insert the Install Disc into the disc drive. When you insert the Install Disc into the disc drive, Software Installer may launch automatically.
  • Page 47 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select [I accept the terms in the license agreement], and click [Next]. The Select Port screen is displayed. Configure the printer port. The procedure for configuring the printer port varies depending on the connection. Go to the steps suited to your connection.
  • Page 48 The TCP/IP port is created and the Ready to Install the Program screen will be displayed.  Searching may take a while depending on the Windows OS or network environment.  When you want to verify and/or change the SNMP settings to find the target TOSHIBA MFPs, see step 4 in the following section: ...
  • Page 49 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Confirm that the installation is completed, and then click [Finish]. The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.” and click [Finish] to restart your computer. Installing the Printer Drivers 49...
  • Page 50 3.INSTALLING PRINTER DRIVERS FOR WINDOWS If your TOSHIBA MFP is not found If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port and then configuring the Raw TCP/LPR port. If this equipment is not discovered over the network after the installation is started, a dialog box indicating this appears.
  • Page 51 3.INSTALLING PRINTER DRIVERS FOR WINDOWS  SMB printing Install a printer driver by specifying the SMB port manually.  Before starting the configuration, make sure that this equipment is connected to a network and also that its power is turned ON. ...

  • Page 52: Installing The Printer Drivers From Topaccess

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Installing the printer drivers from TopAccess Perform installation corresponding to your Windows computer.  The following is necessary to use this option: - The hard disk is installed in the equipment. - The SMB protocol is enabled, and the file share function is not restricted. For details, ask your administrator.
  • Page 53 The result of the installation is displayed on the task bar.  The printer driver has been installed normally (when SNMP V1 and V2 are configured for your TOSHIBA MFP).  The printer driver has been installed normally (when SNMP V3 is configured for your TOSHIBA MFP).

  • Page 54: Installing The Printer Drivers From The Equipment's Shared Folder

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Installing the printer drivers from the equipment’s shared folder Perform installation corresponding to your Windows computer.  The following is necessary to use this option: - The hard disk is installed in the equipment. - The SMB protocol is enabled, and the print share function is not restricted.
  • Page 55 The result of the installation is displayed on the task bar.  The printer driver has been installed normally (when SNMP V1 and V2 are configured for your TOSHIBA MFP).  The printer driver has been installed normally (when SNMP V3 is configured for your TOSHIBA MFP).

  • Page 56: Other Installations

    Other Installations The following printing environments cannot be configured by installation using Software Installer or the individual installers contained in the Install Disc (except USB printing in Windows 7 or later / Windows Server 2012 or later). When you want to configure the following printing environments, see the following pages for each procedure. ...
  • Page 57 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Next]. When you are using Windows Vista / Windows 7 / Windows 8.1 / Windows Server 2008 / Windows Server 2012, the following screen is displayed. Select [Add a local printer]. Other Installations 57...
  • Page 58 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select [Add a printer using a TCP/IP address or hostname], and click [Next]. When you are using Windows Vista / Windows 7 / Windows 8.1 / Windows Server 2008 / Windows Server 2012, the following screen is displayed. Select [Create a new port], and select [Standard TCP/IP Port]. Then click [Next]. Enter the appropriate Hostname or IP address, and click [Next].
  • Page 59 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Have Disk]. Click [Browse]. The [Locate File] dialog box appears. Insert the Install Disc into the disc driver of the computer. When you insert the Install Disc into the disc drive, Software Installer may launch automatically. In this case, click [Exit] to close it and continue the operation.
  • Page 60 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Locate the directory where the preferred printer driver is saved, select the .inf file, and then click [Open]. When installing the printer driver using the Install Disc, select the following folder: For the Windows computer 32-bit edition ...
  • Page 61 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Confirm or change the Printer name and click [Next]. Select whether or not to share the printer to other network users, and click [Next]. Click [Finish]. The printer driver is installed. Other Installations 61...

  • Page 62: Usb Printing

     Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a USB hub, the equipment may not be recognized.  If a PCLX error occurs, open [Printer properties] of TOSHIBA Universal Printer2 in [Devices and Printers] and select the [Start printing after last page is spooled] check box in the [Advanced] tab.
  • Page 63 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Printer Driver] or [Custom Install]. Printer Driver — This option allows you to install only the Universal Printer 2 driver. When you select it, proceed to step 7. Custom Install — This option allows you to select the printer drivers and utilities which you want to install. When you select it, proceed to step 6.
  • Page 64 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select [Use the following port] and “USBxxx” (xxx are numbers). Then click [OK]. Confirm that the installation is completed, and then click [Finish]. The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.” and click [Finish] to restart your computer.
  • Page 65 3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Windows Vista / Windows Server 2008 You can install a printer driver for USB printing in Windows Vista / Windows Server 2008 by Plug and Play. To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation and uninstallation of client software.
  • Page 66 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select a printer driver to be installed and click [Next]. All available drivers are listed. If a wrong driver is installed, printing may not be performed properly. When using the Windows computer 32-bit edition, select the following folder: ...

  • Page 67: Ipp Printing

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  IPP printing This section describes how to set up the printer drivers for IPP printing which is available for Internet connection. To set up the printer drivers for IPP printing, install the printer drivers by Add Printer Wizard. Before installing the printer driver for IPP printing, check with your system administrator to make sure of the following: ...
  • Page 68 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select [The printer that I want isn’t listed]. Select the [Select a shared printer by name] check box, enter “http://[IP address]:631/Print” in the edit box in [Find by printer name or TCP/IP address] screen.  Enter the IP address of this equipment instead of [IP address]. Example: IP address = 192.168.1.2 http://192.168.1.2:631/Print ...
  • Page 69 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Next]. A dialog box appears to confirm the connection with the specified MFP. Wait until completion. When the Authentication setting for IPP Print is enabled, the dialog box to enter a user name and password appears.
  • Page 70 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Locate the directory where the printer driver is located, select the .inf file, and then click [Open].  When using the Windows computer 32-bit edition, select the following folder: - Universal Printer 2 driver [Install Disc]:\Client\Drivers\UNI\32bit - Universal PS3 printer driver [Install Disc]:\Client\Drivers\PS\32bit ...
  • Page 71 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Finish]. The printer driver is installed. Other Installations 71...

  • Page 72: Novell Iprint

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Novell iPrint This section describes how to install the printer drivers for Novell iPrint. To install the printer driver for Novell iPrint on the client computer, download and install the Novell iPrint Client and printer driver from the NetWare print server.

  • Page 73: Web Service Print

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Web Service Print This equipment supports the WSD (Web Services on Devices) protocol installed in Windows Vista or later / Windows Server 2008 or later. The following describes how to install a printer driver using the WSD protocol. ...
  • Page 74 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Yes, turn on network discovery and file sharing for all public networks]. Connected computers and icons of the multifunction devices are displayed in the [Network] screen. Open the [Devices and Printers] folder. Right-click [Start], then click [Control Panel] > [View devices and printers]. ...
  • Page 75 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select the icon of the multifunction device of the equipment and click [Next]. The installation begins. The installation is completed. Other Installations 75...
  • Page 76 3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Windows Vista / Windows Server 2008 Follow the steps below to install a printer driver on Windows Vista / Windows Server 2008. Click the start button and click [Network] to open the [Network] screen. ...
  • Page 77 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Select the icon of the multifunction device of the equipment and right-click to make the menu appear, then click [Install]. You can display only the multifunction devices by checking [Multifunction Devices] on the [Category] box. [PnPX Device Association] is displayed on the task bar.
  • Page 78 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Browse my computer for driver software (advanced)]. Set the Install Disc to the disc drive, click [Browse] to specify the position of the disc drive and then click [Next]. When you insert the Install Disc into the disc drive, Software Installer may launch automatically. In this case, click [Exit] to close it and continue the operation.

  • Page 79: Copying The Ppd File For Windows

    Copying the PPD File for Windows The Install Disc contains a printer description file for popular Windows applications. For applications not allowing the automatic installation of PPD files, copy the PPD file to a proper directory in order to enable printer-specific settings in the [Print] dialog box or the [Page Setup] dialog box.

  • Page 80: Uninstalling Printer Drivers

    Uninstalling Printer Drivers The following instructions describe how to uninstall a printer driver.  P.80 “Windows 7 or later / Windows Server 2012 or later”  P.82 “Windows Vista / Windows Server 2008”  Windows 7 or later / Windows Server 2012 or later Follow the steps below to uninstall a printer driver from Windows 7 or later / Windows Server 2012 or later.
  • Page 81 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Display the [Drivers] tab and click [Change Driver Settings]. Select the printer driver to be deleted and click [Remove]. Select [Remove driver and driver package] and click [OK]. Click [Yes]. Click [Delete]. Click [OK]. Close the [Print Server Properties] dialog box. Uninstalling Printer Drivers 81...

  • Page 82: Windows Vista / Windows Server 2008

    3.INSTALLING PRINTER DRIVERS FOR WINDOWS  Windows Vista / Windows Server 2008 Follow the steps below to uninstall a printer driver from Windows Vista / Windows Server 2008. To perform uninstallation, you must log onto Windows with the “Administrator” account. Click [Start], select [Control Panel] and click [Printer] under [Hardware and Sound] to open the [Printers] folder.
  • Page 83 3.INSTALLING PRINTER DRIVERS FOR WINDOWS Click [Delete]. Click [OK]. Close the [Print Server Properties] dialog box. Uninstalling Printer Drivers 83...
  • Page 84 3.INSTALLING PRINTER DRIVERS FOR WINDOWS 84 Uninstalling Printer Drivers...
  • Page 85 INSTALLING PRINTER DRIVERS FOR MAC OS This chapter provides instructions on how to install client software for Mac OS. About the Installation .......................86 About client software for Mac OS........................86 System requirements ............................86 Installing the Printer on Mac OS..................87 Installing the Mac OS PPD file ..........................87 Configuring the printer ............................90 Uninstalling the Mac OS PPD File ..................97...

  • Page 86: About The Installation

    About the Installation Refer to following instructions for configuring printing systems on Mac computers.  P.86 “About client software for Mac OS”  P.86 “System requirements”  P.87 “Installing the Printer on Mac OS”  About client software for Mac OS PostScript Printer Description file The Mac OS PPD (PostScript Printer Description) file contains information about controller-specific features.

  • Page 87: Installing The Printer On Mac Os

    Installing the Printer on Mac OS Install and configure the printer by the following pages:  P.87 “Installing the Mac OS PPD file”  P.90 “Configuring the printer”  Installing the Mac OS PPD file Insert the Install Disc into the disc drive and open “MacPPD/OSX10_6-” folder. Open “2-sided_default”...
  • Page 88 4.INSTALLING PRINTER DRIVERS FOR MAC OS Click [Continue]. Click [Agree]. 88 Installing the Printer on Mac OS...
  • Page 89 4.INSTALLING PRINTER DRIVERS FOR MAC OS Click [Install] (or [Upgrade]). The Select a Destination dialog box appears by clicking [Change Install Location]. Select the boot disk for Mac OS X and click [Continue]. Enter the name and password, and click [Install Software]. It starts copying the PPD files for each language.

  • Page 90: Configuring The Printer

    4.INSTALLING PRINTER DRIVERS FOR MAC OS Click [Close] to close the installer window. Continue the procedure for configuring the printer.  Configuring the printer After you copy the PPD file to the library folder in the System Folder, you can configure the printer. The equipment supports the following Mac OS Printing Services: ...
  • Page 91 Name: <Any Name> Location: <Any Name> Use: TOSHIBA xxxxxMFP The "xxxxx" part of the file name is replaced in "Color" or "Mono" depending on the installed PPD file.  In the [Name] box, the name that is entered in the [Address] box is automatically displayed.
  • Page 92 4.INSTALLING PRINTER DRIVERS FOR MAC OS Set the following options. For setting items, refer to the following section.  P.96 “Option setting list” Click [OK]. The printer is added to the Printer List.  Configuring IPP printing Open System Preferences and click [Printers & Scanners]. Click [+].
  • Page 93 Name: <Any Name> Location: <Any Name> Use: TOSHIBA xxxxxMFP The "xxxxx" part of the file name is replaced in "Color" or "Mono" depending on the installed PPD file.  In the [Name] box, the name that is entered in the [Address] box is automatically displayed.
  • Page 94 Open System Preferences and click [Printers & Scanners]. Click [+]. Click [Default] and select the TOSHIBA MFP of the Bonjour connection displayed in the list.  In the [Name] box, the device name that you selected in the list is automatically displayed.
  • Page 95 4.INSTALLING PRINTER DRIVERS FOR MAC OS Set the following options. For setting items, refer to the following section.  P.96 “Option setting list” Click [OK]. The printer is added to the Printer List. Installing the Printer on Mac OS 95...

  • Page 96: Option Setting List

    4.INSTALLING PRINTER DRIVERS FOR MAC OS  Option setting list  Model Selection TOSHIBA e-STUDIO5005ACSeries — Select this when e-STUDIO5005AC Series is used. TOSHIBA e-STUDIO5008ASeries — Select this when e-STUDIO5008A Series is used. TOSHIBA e-STUDIO7506ACSeries — Select this when e-STUDIO7506AC Series is used.

  • Page 97: Uninstalling The Mac Os Ppd File

    Uninstalling the Mac OS PPD File In order to uninstall the Mac OS PPD file, delete the PPD file in the following folder.  Library/Printers/PPDs/Contents/Resources/TOSHIBA_xxxxxMFP_X7.gz  Library/Printers/toshiba/filter  Library/Printers/toshiba/Icons  Library/Printers/toshiba/PDEs The "xxxxx" part of the file name is replaced in "Color" or "Mono" depending on the installed PPD file.
  • Page 98 4.INSTALLING PRINTER DRIVERS FOR MAC OS 98 Uninstalling the Mac OS PPD File...
  • Page 99 INSTALLING PRINTER DRIVERS FOR UNIX/ Linux This chapter provides instructions on how to install client software for UNIX/Linux. Setting Up the UNIX/Linux Filters..................100 About UNIX/Linux filters ............................100 System requirements ............................101 Precautions for using user authentication .......................101 Configuring UNIX/Linux printing using UNIX/Linux filters ................101 Setting Up the CUPS .......................

  • Page 100: Setting Up The Unix/Linux Filters

    This file is a shell script that simulates the command line functions of lp. After processing the command line options, the e-STUDIO filter is invoked in the same way as a System V print filter. This file is installed in “/opt/toshiba/tap/bin”.

  • Page 101: System Requirements

    5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux  System requirements For UNIX/Linux workstation, the following environment is required. Sun Solaris 11.2 HP-UX Version 11iv3 IBM AIX 7.x Fedora 21/22 Red Hat Enterprise Linux 5.x/6.x/7.x SuSE Linux Enterprise Server 11/12 Open SUSE 13.2/13.3 Ubuntu 14.04LTS/15.04 Debian 7/8 Protocol:...
  • Page 102 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Copy the tar file onto the root. A tar file for each operating system is included in following folders:  Color MFP - For Solaris: [Install Disc]/Admin/Color_Unix_Linux/SolarisFilter/Usa/ - For HP-UX: [Install Disc]/Admin/Color_Unix_Linux/HP-UXFilter/Usa/ - For AIX: [Install Disc]/Admin/Color_Unix_Linux/AIXFilter/Usa/ - For Linux: [Install Disc]/Admin/Color_Unix_Linux/LinuxFilter/Usa/ ...

  • Page 103: Configuring The Print Queue

    - Solaris: /etc/lp/interfaces - HP-UX: /etc/lp/interface - IBM AIX: /opt/toshiba/tap/filter - Linux: /opt/toshiba/tap/interface  Under Linux, the printtool (or equivalent) utility must be used to add the printer into the lp printing system after executing the estcoloradd/estbwadd command. For printtool utility, refer to the manual of the OS.
  • Page 104 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Creating a print queue manually on Solaris Log on to the root account. Open your UNIX/Linux editor. Create the following file. /etc/lp/interfaces/<queue name>.conf Add a line as below in the <queue name>.conf. dest=<IP address> Save the file. Enter the following command to change the working directory: cd /etc/lp/interfaces/ Enter the following command:...
  • Page 105 If you turn OFF the scheduler in step 10, turn the scheduler ON. Enter the following command: /usr/sbin/lpsched > /dev/null 2>&1 Creating a print queue manually on IBM AIX Enter the following command: ls /opt/toshiba/tap/filter If the above directory does not exist, enter the following command: mkdir /opt/toshiba/tap/filter Log on to the root account.
  • Page 106 -a ‘up = TRUE’ -a ‘host = <IP address>’ -a ‘rq = print’ Enter the following command: Color MFP: mkquedev –q <queue name> -ddev_<queue name> \ -a 'backend = /opt/toshiba/tap/bin/estcolorBackend' Black and White MFP: mkquedev –q <queue name> -ddev_<queue name> \ -a 'backend = /opt/toshiba/tap/bin/estbwBackend'...
  • Page 107 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux If the above file exists, enter the following command. /opt/toshiba/tap/bin/printconf_import \ -a <queue name> <IP_ADDRESS> rm /opt/toshiba/tap/bin/flag_<queue name> Restart your lpd. Setting Up the UNIX/Linux Filters 107...

  • Page 108: Changing The Default Values

    /bin/sh variable format. The interface file is saved in the following directory. - Solaris: /etc/lp/interfaces - HP-UX: /etc/lp/interface - IBM AIX: /opt/toshiba/tap/filter - Linux: /opt/toshiba/tap/interface To edit the configuration file manually, add a line that include parameters and value.
  • Page 109 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Deleting a Print Queue Manually You can also configure the print queue by deleting a print queue manually. The procedure varies depending on the operating systems.  P.109 “Deleting a print queue manually on Solaris” ...
  • Page 110 Enter the following command: /opt/toshiba/tap/bin/modPrintcap -d <queue name> Enter the following command: ls /opt/toshiba/tap/bin/flag_<queue name> If the above file exists, enter the following command: /opt/toshiba/tap/bin/printconf_import -d <queue name> \ rm /opt/toshiba/tap/bin/flag_<queue name> Restart your lpd. 110 Setting Up the UNIX/Linux Filters...

  • Page 111: Setting Up The Cups

    Setting Up the CUPS When you want to configure UNIX/Linux printing using CUPS, you can use LPR printing or IPP printing. When printing using CUPS, the output paper size cannot be specified. If you want to specify the output paper size, use the UNIX/Linux filter.

  • Page 112: Configuring Unix/Linux Printing Using Cups

    After extracting the PPD file, restart the CUPS daemon. The PPD is placed in the “/usr/share/cups/model/Toshiba” directory (which will require root privileges and the Toshiba directory may need to be created). The PPD can be simply copied to the appropriate directory and the CUPS daemon re-started.
  • Page 113 The target directory to which the PPD file is copied cd /usr/lib/cups/filter/Toshiba mv estXXXX_Authentication The target directory to which the filter file is copied “XXXX” is the model name of the TOSHIBA MFP. Black and White MFP: cd /usr/share/cups/model/Toshiba mv Toshiba_MonoMFP_CUPS.gz...
  • Page 114 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Enter the following command: service cups start If the CUPS has already been started, stop the CUPS service once by entering “service cups stop” command, and then enter the above command to restart the CUPS service. Enter the following command: /usr/bin/cupsconfig The Common UNIX Printing System page appears.
  • Page 115 Enter “lpd://<IP address>/Print” in the [Device URI] box and click [Continue]. Make sure to capitalize the “P” in “Print” for the device URI. Select [TOSHIBA] in the [Make] box and click [Continue]. If you do not see [TOSHIBA] in the [Make] list, restart CUPS. Setting Up the CUPS 115...
  • Page 116 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Select the PPD in the [Model] list and click [Continue]. Confirm that the message notifying that the new printer has been properly added appears. Go to the following page for configuring the print options:  P.121 “Configuring print options” 116 Setting Up the CUPS...

  • Page 117: Installing The Cups For Ipp Printing

    5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux  Installing the CUPS for IPP printing When you want to set up an IPP print queue in the Linux OS, follow the procedures here. When IPP SSL is enabled on the equipment When the IPP SSL is enabled on the equipment, you require the following settings on Linux OS. ...
  • Page 118 Toshiba_ColorMFP_CUPS.gz The target directory to which the PPD file is copied cd /usr/lib/cups/filter/ mv estXXXX_Authentication The target directory to which the filter file is copied “XXXX” is the model name of the TOSHIBA MFP. Black and White MFP: cd /usr/share/cups/model/Toshiba mv Toshiba_MonoMFP_CUPS.gz The target directory to which the PPD file is copied...
  • Page 119 Change the following underlined description in the TOSHIBA_ColorMFP_CUPS / TOSHIBA_MonoMFP_CUPS file (involved in the 60th line) to the correct directory. *cupsFilter:”application/vnd.cups-postscript 0 /usr/lib/cups/filter/Toshiba/estXXXX_Authentication” “XXXX” is the model name of the TOSHIBA MFP. Enter the following command for compressing the PPD file: Color MFP:...
  • Page 120 Location: <Optional> Description: <Optional> Device: Internet Printing Protocol (http) Device URI: http://<IP address>:631/Print Model/Driver: TOSHIBA When IPP/SSL is enabled, specify as follows:  Device: Internet Printing Protocol (https)  Device URI: https://<IP address>:443/Print Using CUPS Client (print commands lp, lpr, etc.) with -e option, the connection can be encrypted and printing can be done in the above configured printer.

  • Page 121: Configuring Print Options

    5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux  Configuring print options You can set the print options that are applied to the print jobs using CUPS. Click the [Manage Printers] link on the startup page. The Printer page is displayed. Select this equipment and then click [Configure Printer]. Setting Up the CUPS 121...
  • Page 122 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Configure the print options on the displayed page. The underscored items are set by default. Booklet Option Value Alternative Value Description Booklet Center 0 to 36 (in unit of 3 points) Select the center margin. Margin Booklet Outer 0 to 72 (in unit of 6 points)
  • Page 123 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Color Settings 1 (For Color MFPs) Option Value Alternative Value Description Color Type Auto Select whether a print job is printed in color, mono, or twin color. Color Mono Black and Red Black and Green Black and Blue Black and Cyan Black and Magenta...
  • Page 124 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Option Value Alternative Value Description Pure Black and Gray Select whether printing the black and gray scale Black - Auto contents in a document using the black toner. Black - Text Black - Text and Graphic Black - Text, Graphic and Image Black and Gray - Auto Black and Gray - Text...
  • Page 125 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Finishing Option Value Alternative Value Description Destination Printer’s Default Select a destination. Exit Tray Tray 1 Tray 2 The destinations that you can choose vary depending Upper Exit Tray on the model and the installed options. Side Exit Tray Job Separator Upper Job Separator Lower...
  • Page 126 Determines the selected items. button Options Installed Option Value Alternative Value Description Model Selection TOSHIBA e-STUDIO5005ACSeries TOSHIBA e-STUDIO5008A Series TOSHIBA e-STUDIO7506AC Series TOSHIBA e-STUDIO8508A Series Drawers Drawer 1 Select an optional drawer. Drawer 1 & LCF Drawer 1 & Drawer 2 Drawer 1, 2 &...
  • Page 127 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Printing Modes Option Value Alternative Value Description Department Code Disabled Select whether or not to use the department codes for Enabled printing. When this equipment is managed under the department codes, this option should be enabled. Do not Print Blank Off, On Select whether or not a blank page is printed.
  • Page 128 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux Option Value Alternative Value Description Ending Banner none Select whether to print banner pages after printing documents. If you want to print them, select a banner type. classified Classified information confidential Confidential information secret Secret information standard Standard information topsecret...
  • Page 129 5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux  Modifying printer You can modify a printer that you have created. Click the [Manage Printers] link on the startup page. The Printer page is displayed. Click [Modify Printer]. Modify the location and description in each box and click [Continue]. Setting Up the CUPS 129...

  • Page 130: Uninstalling Printer

    Click the [Manage Printers] link on the startup page. The Printer page is displayed. Click [Delete Printer].  When a message appears asking to remove the printer, click [Continue].  The printer is deleted. Delete the PPD file “TOSHIBA_ColorMFP_CUPS.gz” from the “/usr/share/cups/model/Toshiba” directory. 130 Setting Up the CUPS...
  • Page 131 INSTALLING SCAN DRIVER AND UTILITIES (Windows) This chapter describes the installation of the scan driver and scan utilities. Before Installation......................132 Type of scan driver and utilities ........................132 System requirements ............................132 Installing Scan Driver and Utilities ................... 133 Installing the scan driver and utilities using the installer................133 Installing WIA driver to Windows computer .....................135 Uninstalling Scan Driver and Utilities ................

  • Page 132: Before Installation

    Before Installation This section describes the installation of the scan driver and utilities. Before installing them, read this section.  Type of scan driver and utilities Install the following utilities to use the network scan functions.  TWAIN driver This software component enables you to import e-Filing documents into TWAIN-compliant applications. ...

  • Page 133: Installing Scan Driver And Utilities

    Installing Scan Driver and Utilities This section describes how to install the scan driver and utilities.  Installing the scan driver and utilities using the installer Perform installation corresponding to your Windows computer. However, you need to follow a different procedure when you install WIA driver into Windows Vista or later / Windows Server 2008 or later.
  • Page 134 6.INSTALLING SCAN DRIVER AND UTILITIES (Windows) The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.” and click [Finish] to restart your computer. Click [Exit]. When a message appears asking whether to finish the installer, click [Yes]. 134 Installing Scan Driver and Utilities...

  • Page 135: Installing Wia Driver To Windows Computer

    6.INSTALLING SCAN DRIVER AND UTILITIES (Windows)  Installing WIA driver to Windows computer This section describes how to install WIA driver to Windows Vista or later / Windows Server 2008 or later. Perform installation corresponding to your Windows computer.  To begin the installation of the WIA driver, you must first install the scan utilities to your computer. For instructions on how to install them to your computer, see the following page: ...
  • Page 136 6.INSTALLING SCAN DRIVER AND UTILITIES (Windows) Click [Yes, turn on network discovery and file sharing for all public networks]. Connected computers and icons of the multifunction devices are displayed in the [Network] screen. Open the printers folder. Right-click [Start], then click [Control Panel] > [View devices and printers]. ...
  • Page 137 6.INSTALLING SCAN DRIVER AND UTILITIES (Windows) Select the icon of the multifunction device of the equipment and click [Next].  When you are using Windows 7 or later / Windows Server 2012 or later, the installation begins.  When you are using Windows Vista or Windows Server 2008, [PnPX Device Association] is displayed on the task bar.

  • Page 138: Uninstalling Scan Driver And Utilities

    Open the [Devices and Printers] folder, right-click on this equipment, and then select [Remove device] from the menu displayed. Uninstalling TOSHIBA Office Scan Add-In You can uninstall TOSHIBA Office Scan Add-In using Uninstall a program function in Control Panel. For instructions on how to uninstall them, refer to the following section.  P.152 “Uninstalling Client Software”...
  • Page 139 INSTALLING NETWORK FAX UTILITIES (Windows) This chapter describes the installation of the network fax utilities. Before Installation......................140 Type of network fax utilities ..........................140 System requirements ............................140 Installing Network Fax Utilities ..................141 Installing Web Service Print .................... 142 Uninstalling the Network Fax Software ................143 Uninstalling N/W-Fax driver ..........................143 Uninstalling AddressBook Viewer ........................143...

  • Page 140: Before Installation

    Before Installation This section describes the installation of the network fax utilities. Before installing them, read this section.  Type of network fax utilities Install the following utilities to use the network fax functions. N/W-Fax driver The N/W-Fax driver enables you to set up send lists and send electronic documents from your client computer to one or more destinations.

  • Page 141: Installing Network Fax Utilities

    Click [Fax Driver]. Confirm the list of the software to install and click [Install]. When you want to verify and/or change the SNMP settings to find the target TOSHIBA MFPs, see step 4 in the following section:  P.26 “Procedure for Recommended Installation”...

  • Page 142: Installing Web Service Print

    Installing Web Service Print You can install a N/W-Fax driver in Windows Vista or later / Windows Server 2008 or later using the WSD (Web Services on Devices) protocol. Since the installation procedure is the same as for printer drivers, it is omitted. When performing installation, see the following page: ...

  • Page 143: Uninstalling The Network Fax Software

    Uninstalling the Network Fax Software The following instructions explain how to uninstall the N/W-Fax driver and AddressBook Viewer.  Uninstalling N/W-Fax driver You can uninstall a N/W-Fax driver. Since the uninstallation procedure is the same as for printer drivers, it is omitted. When performing uninstallation, see the following page: ...
  • Page 144 7.INSTALLING NETWORK FAX UTILITIES (Windows) 144 Uninstalling the Network Fax Software...
  • Page 145 INSTALLING e-Filing UTILITY (Windows) This chapter describes the installation of the e-Filing Backup/Restore Utility. Before Installation......................146 System requirements ............................146 Installing e-Filing Backup/Restore Utility ................. 147 Uninstalling e-Filing Backup/Restore Utility ..............149...

  • Page 146: Before Installation

    Before Installation This section describes the installation of the e-Filing Backup/Restore Utility. Before installing them, read this section.  System requirements To install the e-Filing Backup/Restore Utility on a Windows computer, the following is required.  Display resolution 1024 x 768 dots or more ...

  • Page 147: Installing E-Filing Backup/Restore Utility

    Installing e-Filing Backup/Restore Utility Perform installation corresponding to your Windows computer. To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation and uninstallation of client software. If Windows Vista or later / Windows Server 2008 or later is used, you can perform the installation by temporarily changing the user account following the procedure below.
  • Page 148 8.INSTALLING e-Filing UTILITY (Windows) Select “I accept the terms in the license agreement” and click [Next]. Click [Next]. Click [Install]. Click [Finish]. The installation is completed. The Installer may ask you to restart your computer. If it does, select “Yes”, I want to restart my computer now.” and click [Finish] to restart your computer.

  • Page 149: Uninstalling E-Filing Backup/Restore Utility

    Uninstalling e-Filing Backup/Restore Utility You can uninstall e-Filing Backup/Restore Utility using the Uninstall a program function in Control Panel. For instructions on how to uninstall them, refer to the following section.  P.152 “Uninstalling Client Software” Uninstalling e-Filing Backup/Restore Utility 149...
  • Page 150 8.INSTALLING e-Filing UTILITY (Windows) 150 Uninstalling e-Filing Backup/Restore Utility...

  • Page 151: Installation Maintenance

    INSTALLATION MAINTENANCE This chapter describes how to uninstall and repair the client software using the set-up program. Uninstalling Client Software ................... 152 Repairing Client Software ....................154...

  • Page 152: Uninstalling Client Software

    Uninstalling Client Software The following describes how to uninstall client software.  The printer drivers and N/W-Fax driver cannot be uninstalled by the set-up program. For instructions on how to uninstall them, refer to the following section.  P.80 “Uninstalling Printer Drivers” ...
  • Page 153 9.INSTALLATION MAINTENANCE Click [Yes] to delete the setting files. Deleting files starts. If you want to reinstall the client software later, click [No] to have the setting files remain. You can restore the data and settings when you reinstall the client software. Uninstalling Client Software 153...

  • Page 154: Repairing Client Software

     To repair AddressBook Viewer (for Windows computer 32-bit edition), locate “[Install Disc]:\Client\ADRBK\32bit\”.  To repair AddressBook Viewer (for Windows computer 64-bit edition), locate “[Install Disc]:\Client\ADRBK\64bit\”.  To repair TOSHIBA Office Scan Add-In, locate “[Install Disc]:\Admin\Add-In\”. Select the language and click [OK]. Click [Next].
  • Page 155 9.INSTALLATION MAINTENANCE Click [Finish] to close the wizard. Repairing Client Software 155...
  • Page 156 9.INSTALLATION MAINTENANCE 156 Repairing Client Software...

  • Page 157: Cautions And Related Messages Regarding Installation (Windows)

    CAUTIONS AND RELATED MESSAGES REGARDING INSTALLATION (Windows) This chapter describes how to uninstall and repair the client software using the set-up program. Cautions before installation .................... 158 Messages that may appear in installation ................. 159 Cautions after installation ....................160...

  • Page 158: Cautions Before Installation

     When all or any of the Remote Scan driver, TWAIN driver or WIA driver is installed in your computer in which Microsoft Office 2013 is installed, TOSHIBA Office Scan Add-In is installed automatically.  When the Web Service printer driver is installed in Windows Vista / Windows Server 2008, the driver for Web Services Scanning is also installed together with the client software.

  • Page 159: Messages That May Appear In Installation

    Messages that may appear in installation If the following message appears, click [Install this driver software anyway] to proceed with the installation. Messages that may appear in installation 159...

  • Page 160: Cautions After Installation

    Cautions after installation  To perform uninstallation, you must log onto Windows with the “Administrator” account. Even if you have logged on with a user account other than “Administrator”, entering an administrator password upon display of the [User Account Control] dialog box enables you to perform the installation by temporarily changing the user account. ...

  • Page 161: Index

    INDEX AddressBook Viewer ..........16, 140 CUPS ................111 File Downloader ............16, 132 Install Disc ............... 12 Install Software link ..........18, 52, 54 Installer................12 Internet printing.............. 35 IPP printing..............56, 67 Mac OS PPD ..............86 N/W-Fax driver............16, 140 Novell iPrint..............
  • Page 162 162 INDEX...
  • Page 163 FC-2000AC/2500AC FC-2505AC/3005AC/3505AC/4505AC/5005AC DP-2008A/2508A/3008A/3508A/4508A/5008A FC-5506AC/6506AC/7506AC DP-5508A/6508A/7508A/8508A OME150059B0...
  • Page 164 MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS / MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 1-11-1, OSAKI, SHINAGAWA-KU, TOKYO, 141-8562, JAPAN R150620Q7302-TTEC ©2016 TOSHIBA TEC CORPORATION All rights reserved Ver02 F Issued in Oct. 2016 Patent; http://www.toshibatec.co.jp/en/patent/...

This manual is also suitable for:

E-studio2505acE-studio2500acE-studio5005acE-studio4505acE-studio2000acE-studio2008a ... Show all

Table of Contents