New Holland T8010 Manual page 1660

STEP 33
The bottom of the display will read AUX (remote
hydraulic controller). Press the INCR or DECR key to
toggle between YES and NO. Select your choice and
press the PROG key, The system will go to the next
step.
STEP 34
The bottom of the display will read HITCH (hitch
controller). Press the INCR or DECR key to toggle
between YES and NO. Select your choice and press
the PROG key, The system will go to the next step.
Section 55 - Electrical System, Controller - Chapter 6
MD05F032
MD05F031
55-6-15
STEP 35
The bottom of the display will read PTO (AUX/
HITCH/PTO controller). Press the INCR or DECR
key to toggle between YES and NO. Select your
choice and press the PROG key, The system will go
to the next step.
STEP 36
Press the DECR key. The display will read CONFIG
ICU, 1. Operator Setup, 2. Controller Config, 3.
Exit. Use the DECR key to highlight Exit. Press the
P RO G key t o exi t i ns tr um en tat io n c on tr ol l er
configuration.
RD06A075
MD05F025