New Holland T8010 Manual page 1653

Hide thumbs Also See for T8010:

Table of Contents

When the AUTO format is selected in Step 9 the

display will show the radius icon followed by AUTO.

The next line reads *READY* and the bottom of the

screen reads PRESS <INCR> TO START.

Select a forward gear and engine rpm that will

maintain a steady speed above 2 MPH (3.22 KPH),

release the clutch and press the INCR key when the

front wheels touch the start line. The display will read

*WORKING* and PRESS <DECR> TO STOP.

Section 55 - Electrical System, Controller - Chapter 6

Press the DECR key when the front wheels touch the

finish line.

If successful the ICU will calibrate the tire radius,

display and save the new value for 2 seconds before

returning to the CONFIG ICU options screen.

If unsuccessful, due to unsteady tractor speed or the

INCR and DECR keys were not pressed at the

proper time the display will read *FAILED* for 2

seconds before returning to CONFIG ICU options.

Repeat Steps 9 through 12.

Chapters

Table of Contents

T8020 T8030 T8040