Radar Calibration - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Radar Calibration

After the Tire Radius has been completed the

CONFIG ICU options screen is displayed.

NOTE: If only calibrating the radar, complete Steps

1, 2 and 3 to display the CONFIG ICU options.

Use the INCR or DECR keys to highlight Radar Cal

and press the PROG key.

If the tractor is not equipped with radar the display

will read RADAR NOT PRESENT.

Section 55 - Electrical System, Controller - Chapter 6

The display will show the radar icon and RADAR

CAL. The next line shows MANUAL with the manual

icon and the bottom line shows AUTO. Use the INCR

and DECR keys to highlight either MANUAL or

AUTO. Use the PROG key to enter the selected

If MANUAL is selected, proceed to Step 15. If AUTO

(automatic) is selected, proceed to Step 16.

NOTE: It is recommended to use the AUTO format.

The MANUAL format may need to be repeated

numerous times before the correct calibration is

Table of Contents

T8020 T8030 T8040