New Holland T8010 Manual page 1649

Hide thumbs Also See for T8010:

Table of Contents

To erase the fault codes from a controller, press and

hold both the INCR and DECR keys for 10 seconds.

NOTE: All the fault codes for that controller will be

When the fault codes are erased, the display will

return to the DIAG MENU screen for that controller.

Section 55 - Electrical System, Controller - Chapter 6

Another controller can be selected at this time by

using the INCR and DECR keys to scroll through the

controller list as in Step 2.

To exit the select controller screen, scroll until EXIT is

displayed and press the PROG key. This will return

you to normal operation.

Chapters

Table of Contents

T8020 T8030 T8040