New Holland T8010 Manual page 1661

Section 55 - Electrical System, Controller - Chapter 6
STEP 37
RD05G056
The display will read CONFIG MENU. Press the
INCR key. The display will read Exit. Press the
PROG key to return to normal operation.
STEP 38
C y c l e t h e key sw i t c h O F F, t h e n O N . C h e ck
controllers for any fault codes. Erase the fault codes if
any exist.
IMPORTANT: The controller must be calibrated
when moved from one tractor to another.
55-6-16