New Holland T8010 Manual page 1656

Hide thumbs Also See for T8010:

Table of Contents

Press the DECR key when the front wheels touch the

finish line.

If successful, the ICU will calculate the new radar

calibration and display *COMPLETE*. Press the

PROG key to save the new value and return to the

CONFIG ICU options screen.

If unsuccessful, due to unsteady tractor speed or the

INCR and DECR keys were not pressed at the

proper time, the display will read *FAILED*, Repeat

Steps 16 through 19, or press PROG to exit the

Press the DECR key to highlight EXIT. Press the

Section 55 - Electrical System, Controller - Chapter 6

The CONFIG MENU is displayed.

Press the INCR key to highlight EXIT. Press the

PROG key to exit tractor setup and return to normal

If the programmable display reads FAILED at any

time during the calibration process a condition has

occurred which caused the calibration process to fail.

Press the PROG key to exit the calibration.

Chapters

Table of Contents

T8020 T8030 T8040