Table of Contents
Advertisement
Installation Procedure Overview
There are three software installation scenarios:
The following table lists the procedure for each software installation
scenario.
SpectrAA Base (Page 42)
1. Install SpectrAA Base
2. Configure instrument for
use
3. Install SpectrAA Help and
Videos
4. Install GPIB
Communications Card or
USB-GPIB-HS Converter
Guidelines for Software Installation
The following information assumes that you are working on a clean,
empty hard disk. If you have any other files on the PC hard disk,
ensure that you make backups of these files before continuing.
Agilent will not assume responsibility for the loss of data files or third party
NOTE
software.
For instructions on installing the Windows operating system refer to
the documentation supplied with Microsoft Windows. It is the
responsibility of the customer to ensure that the Microsoft Windows
operating system is installed on the computer.
Agilent 240/280 Series AA User's Guide
SpectrAA Base (for use with SpectrAA Base version 5.2 or
greater and Windows 7 Professional 64-bit SP1 operating
systems)
SpectrAA PRO (for use with SpectrAA PRO version 5.2 or greater
and Windows 7 Professional 64-bit SP1 operating systems)
SpectrAA CFR (for use with SpectrAA CFR software version 5.1
and Windows XP SP3 operating systems only)
SpectrAA PRO (Page 45)
1. Install SpectrAA Base
2. Configure one or two
instruments for use
3. Install SpectrAA Help and
Videos
4. Install SpectrAA PRO
5. Install GPIB Communications
Card or USB-GPIB-HS Converter
6. Configure for DUO operation (if
DUO is used)
Installation
SpectrAA CFR (Page 47)
1 Install SpectrAA Base v 5.1(27)
2 Configure one or two
instruments for use
3 Install SpectrAA Help and
Videos
4 Install SpectrAA CFR
5 Install GPIB Communications
Card
6 Configure for DUO operation (if
DUO is used)
41
Advertisement
Table of Contents
