Application Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.4

Application Settings

Set the supplementary cyclic settings, interrupt settings, or other parameters for the master/local module.
: Can be set, : Can be set partly, : Cannot be set
Item
Supplementary Cyclic
Settings
Interrupt Settings
Parameter Name
*1 When "Setting Method of Basic/Application Settings" under "Parameter Setting Method" in "Required Settings" is set to "Program",
"Application Settings" cannot be set.
*2 "Data Link Setting at CPU Failure" cannot be set.
*3 "Number of Retries", "Automatic Reconnection Station Count", "Data Link Setting at CPU Failure", and "Scan Mode Setting" cannot be
set.
2 PARAMETER SETTINGS
68
2.4 Application Settings
*1
Availability
Master station Master station
(duplex function)
 
 
 
Local station/standby
master station
*2 *3



Reference
Page 69 Supplementary
Cyclic Settings
Page 70 Interrupt Settings
Page 71 Parameter Name