2.4
Application Settings
Set the event reception from other stations, module operation mode, and other settings for the Motion module.
Item
Communication Speed
Supplementary Cyclic Settings
Transient Transmission Group
*1
No. Setting
Parameter Name
Dynamic Routing
Event Reception from Other
Stations
Module Operation Mode
Security
Interlink Transmission Settings
*1 When the version of Add-on baseSystem is "1.22" or earlier, an error will occur when a value other than 0 is set.
2 PARAMETER SETTINGS
108
2.4 Application Settings
Description
Set the communication speed.
Set the station-based block data assurance and I/O maintenance settings.
Set the transient transmission group No..
Set a name for the module parameter if desired.
Select whether to enable the dynamic routing function.
Select whether to obtain the events occurring in the other stations.
Set the module operation mode of the Motion module.
Set the security measures for access to the Ethernet device.
Set link device ranges when cyclic data are transferred from a station in
the own network to a station in a different network.
Reference
Page 109 Communication Speed Setting
Page 109 Supplementary Cyclic Settings
Page 109 Transient Transmission Group
No. Setting
Page 110 Parameter Name
Page 110 Dynamic Routing
Page 110 Event Reception from Other
Stations
Page 110 Module Operation Mode
Page 111 Security
Page 111 Interlink Transmission Settings