Application Settings - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

2.4

Application Settings

Set the supplementary cyclic settings, interrupt settings, or other parameters for the master/local module.
: Can be set, : Cannot be set
Item Description
Supplementary Cyclic Set the system switching monitoring time, link
Settings scan mode, station-based block data assurance,
and I/O maintenance setting.
Interrupt Settings Set conditions for sending an interrupt request to
the CPU module.
IP Address Set the IP address of the master station and
submaster station to communicate with Ethernet
device over CC-Link IE Field Network.
Communication Mode Set the communication mode of the own station.
Parameter Name Set a name for the module parameter if desired.
Dynamic Routing Select whether to enable the dynamic routing
function.
Event Reception from Select whether to obtain the events occurring in
Other Stations the other stations.
Module Operation Mode Set the mode of the master/local module.
Interlink Transmission Set link device ranges when cyclic data are
Settings transferred from a station in the own network to a
station in another network.
Safety Communication Set whether to use the safety communication
Setting function or not and set the safety connections
and transfer ranges of safety devices.
This item can be set only in a project of the SIL2
Process CPU or the Safety CPU.
Availability
Master Local station
station
 
 
 
 
 
 
 
 
 
*2 *3
 
Reference
Submaster
station
*1
 Page 139
Supplementary Cyclic
Settings

Page 141 Interrupt
Settings
*1
 Page 144 IP Address

Page 145
Communication Mode
 Page 145 Parameter
Name

Page 145 Dynamic
Routing
 Page 146 Event
Reception from Other
Stations

Page 147 Module
Operation Mode
 Page 147 Interlink
Transmission Settings

Page 151 Safety
Communication
Setting
2 PARAMETER SETTINGS
2.4 Application Settings
2
137