System assembly, construction and connection
AC500 (Standard) > Connection and wiring
Fig. 193: Disconnect wire from the spring terminal (steps 4 to 6)
1.
2.
3.
4.
5.
2.6.4.5
Terminals for CANopen/DeviceNet communication modules
Fig. 194: Combicon, 5-pole, female, removable plug with spring terminals
Fig. 195: Combicon, 5-pole, female, removable plug with spring terminals
994
Conductor
4
Terminal with wire connected
Insert screwdriver (2.5 x 0.4 to 3.5 x 0.5 mm) at an angle, screwdriver must be at least 15
mm free of insulation at the tip
While erecting the screwdriver, insert it until the stop (requires a little strength) - terminal is
now open
Remove wire from the open terminal
Done
3ADR010278, 3, en_US
Screwdriver
5
6
2022/01/31