ABB AC500 V3 Hardware Manual page 1002

System assembly, construction and connection
AC500 (Standard) > Handling of accessories
Purpose
The memory card is used to store or backup application data and/or application programs or
project source codes as well as to update the internal CPU firmware.
The memory card is intended for long-term use in standard and XC application.
The memory card can be read/written on a PC with a SDHC compatible memory card reader.
Dimensions
Insert the AC500 V3
memory card
1.
2.
1002
Processor modules can be operated with and without (micro) memory card.
Processor modules are supplied without (micro) memory card. It must be
ordered separately.
The dimensions are in mm and in brackets in inch.
Unpack the memory card.
Insert the memory card into the memory card slot of the processor module until locked.
3ADR010278, 3, en_US 2022/01/31