System:clear; System:communication:lan:configure - Keithley 2461 Reference Manual

Model 2461 Interactive SourceMeter® Instrument Reference Manual

:SYSTem:CLEar

This command clears the event log.
Type
Command only
Usage
:SYSTem:CLEar
Details
This command removes all events from the event log, including entries in the front-panel event log.
Also see
:SYSTem:ERRor[:NEXT]?

:SYSTem:COMMunication:LAN:CONFigure

This command specifies the LAN configuration for the instrument.
Type
Command and query
Usage
:SYSTem:COMMunication:LAN:CONFigure "AUTO"
:SYSTem:COMMunication:LAN:CONFigure "MANual,<IPaddress>"
:SYSTem:COMMunication:LAN:CONFigure "MANual,<IPaddress>,<NETmask>"
:SYSTem:COMMunication:LAN:CONFigure "MANual,<IPaddress>,<NETmask>,<GATeway>"
:SYSTem:COMMunication:LAN:CONFigure?
AUTO
MANual
<IPaddress>
<NETmask>
<GATeway>
2461-901-01 A/November 2015
Affected by
Not applicable
(on page 6-147)
Affected by
Rear panel LAN reset
Use automatically configured LAN settings (default)
Use manually configured LAN settings
LAN IP address; must be a string specifying the IP address in dotted decimal
notation; required if the mode is set to manual (default "0.0.0.0")
The LAN subnet mask; must be a string in dotted decimal notation (default
"255.255.255.0")
The LAN default gateway; must be a string in dotted decimal notation (default
"0.0.0.0")
Section 6: SCPI command reference
Where saved
Not applicable
Where saved
Nonvolatile memory
Default value
Not applicable
Default value
AUTO
6-145