Applicable Standards - INVT Goodrive 35 Series Operation Manual

inverters
Goodrive35
protection
Frequency
Frequency
resolution
Current
Power limit
Field weakening
point
Carrier frequency
B.4.1 EMC compatibility and motor cable length
To comply with the European EMC Directive (standard IEC/EN 61800-3), use the following
maximum motor cable lengths for 4 kHz switching frequency.
All frame sizes (with external EMC filter)
Second environment (category C3)
First environment (category C2)
Maximum motor cable length is determined by the drive's operational factors. Contact the
local representative for the exact maximum lengths when using external EMC filters.
B.5 Applicable standards
The inverter complies with the following standards:
EN ISO 13849-1: 2008
IEC/EN 60204-1:2006
IEC/EN 62061: 2005
IEC/EN 61800-3:2004
IEC/EN 61800-5-1:2007
IEC/EN 61800-5-2:2007
0...400 Hz
0.01 Hz
Refer to Ratings
1.5 · PN
10...400 Hz
4, 8, 12 or 15 kHz(in scalar control)
Safety of machinery-safety related parts of control systems -
Part 1: general principles for design
Safety of machinery. Electrical equipment of machines. Part
1: General requirements.
Safety of machinery – Functional safety of safety-related
electrical,electronic and programmable electronic control
systems
Adjustable speed electrical power drive systems. Part 3: EMC
requirements and specific test methods
Adjustable speed electrical power drive systems – Part 5-1:
Safety requirements – Electrical, thermal and energy
Adjustable speed electrical power drive systems – Part 5-2:
Safety requirements. Functional.
309
www.barghmaher.ir
Maximum motor cable length, 4 kHz
30
30
Appendix B