INVT Goodrive 35 Series Operation Manual page 127

inverters
Goodrive35
Function
Name
code
deviation
limit
PID
command
P09.15 of 0.0~1000.0s
ACC/DEC
time
PID output
P09.16 0.000~10.000s
filter time
PID
P09.17 -100.0~100.0%
pre-setting
P09.18 Reserved 0~65536
P09.19 Reserved 0~65536
P09.20 Reserved 0~65536
P10 Group Simple PLC and multi-step speed control
0: Stop after running once. The inverter has to be
commanded again after finishing a cycle.
1: Run at the final value after running once. After
Simple finish a signal, the inverter will keep the running
P10.00
PLC frequency and direction of the last run.
2: Cycle running. The inverter will keep on running
until receiving a stop command d. And then, the
system will stop.
Simple 0: Power loss without memory
P10.01 PLC 1: Power loss memory;PLC record the running stage
memory and frequency when power loss.
Multi-step
The frequency setting range of stage 0~15:
P10.02
speed 0
-100.0~100.0%，100.0% of the frequency setting
corresponds to the Max. Frequency P00.03.
P10.03 The
Detailed instruction of parameters
126
www.barghmaher.ir
Function codes
Default
Modify
value
%
○
0.0s
○
0.000s
○
0.0%
○
0
○
0
○
0
○
0
○
0
○
0.0%
○
0.0s