INVT Goodrive 35 Series Operation Manual page 69

inverters
Goodrive35
Function
Name
code
3: Run at zero frequency
The inverter will coast to stop when the set
frequency is lower than the lower-limit one. If the set
frequency is above the lower limit one again and it
lasts for the time set by P01.20, the inverter will
come back to the running state automatically.
This function code determines the hibernation delay
time. When the running frequency of the inverter is
lower than the lower limit one, the inverter will pause
to stand by.
When the set frequency is above the lower limit one
again and it lasts for the time set by P01.20, the
inverter will run automatically.
Hibernatio
Note: The time is the total value when the set
P01.20 n restore
frequency is above the lower limit one.
delay time
Setting range: 0.0~3600.0s (valid when P01.19=2)
This function can enable the inverter start or not after
the power off and then power on.
Restart
0: Disable
P01.21 after power
1: Enable, if the starting need is met, the inverter will
off
run automatically after waiting for the time defined by
P01.22.
The
waiting The function determines the waiting time before the
P01.22 time of automatic running of the inverter when powering off
restart and then powering on.
after power
Detailed instruction of parameters
68
www.barghmaher.ir
Function codes
Default
Modify
value
○
0.0s
○
0
○
1.0s