INVT Goodrive 35 Series Operation Manual page 103

inverters
Goodrive35
Function
Name
code
parameter menu. Only correct password can make
the user check or modify the parameters. Please
remember all users' passwords.
Retreat editing state of the function codes and the
password protection will become valid in minute. If
the valid password is available, press PRG/ESC to
enter into the editing state of the function codes, and
then "0.0.0.0.0" will be displayed. Unless input right
password, the operator can not enter into it.
Note: restoring to the default value can clear the
password, please use it with caution.
The function code determines the manner of
parameters copy.
0:No operation
1:Upload the local function parameter to the keypad
2:Download the keypad function parameter to local
address(including the motor parameters)
3:Download the keypad function parameter to local
Parameter address (excluding the motor parameter of P02 and
P07.01
copy P12 group)
4:Download the keypad function parameters to local
address (only for the motor parameter of P02 and
P12 group)
Note: After completing the 1~4 operations, the
parameter will come back to 0 automatically; the
function of upload and download excludes the
factory parameters of P29.
0: No function
QUICK/JO 1: Jogging. Press QUICK/JOG to begin the jogging
P07.02 G function running.
selection 2: Shift the display state by the shifting key. Press
QUICK/JOGto shift the displayed function code from
Detailed instruction of parameters
102
www.barghmaher.ir
Function codes
Default
Modify
value
◎
0
◎
1