INVT Goodrive 35 Series Operation Manual page 290

inverters
Goodrive35
A.2.1 Product naming rules
Fieldbus adapter naming rules, the product model:
No. Instruction
①
Product type EC: extension card
②
Card type TX: communication card
③
Technical Odds such as 1,3,5,7 means the 1
Card 03: PROFIBUS/CANOPEN+Ethernet communication card
④
difference 04: Ethernet+CAN communication card
A.2.2 EC-TX-103 communication card
EC-TX-103 communication card is an optional device to inverter which makes inverter
connected to PROFIBUS network. In PROFIBUSN network, inverter is a subsidiary device.
The following functions can be completed using EC-TX-103 communication card:
● Send control commands to inverter (start, stop, fault reset, etc.).
● Send speed or given torque signal to inverter.
● Read state and actual values from inverter.
● Modify inverter parameter.
Please refer to the description of function codes in Group P15 for the commands supported
by the inverter. Below is the structure diagram of the connection between the inverter and
PROFIBUS/CANOPEN:
A.2.3 The appearance of EC-TX-103 communication card
1
Outline diagram of EC-TX-103 communication card
1. Interface to the panel
EC-TX 1 03
① ② ③ ④
2
3
289
www.barghmaher.ir
Meaning
st nd rd th
, 2 , 3 , 4 technical version
4
5
Appendix A