INVT Goodrive 35 Series Operation Manual page 300

inverters
Goodrive35
Bit Name
Reference value (REF):
nd th
From 2 word to 12 of PZD task message is the main set value REF, main frequency set
value is offered by main setting signal source. As PWM rectifier feedback part doesn't have
main frequency setting part, corresponding settings belong to reserved part, the following
table shows inverter part settings for Goodrive35.
Bit
PZD2 0:Invalid
receiving 1:Set frequency(0~Fmax(unit:0.01Hz))
2:Given PID, range(0~1000,1000 corresponds to
PZD3
100.0%)
receiving
3:PID feedback, range(0~1000,1000 corresponds to
PZD4
100.0%)
receiving
4:Torque set value(-3000~3000,1000 corresponds to
PZD5
100.0% the rated current of the motor)
receiving
5:Set value of the forward rotation upper-limit
PZD6
frequency(0~Fmax unit:0.01Hz))
receiving
6:Set value of the reversed rotation upper-limit
PZD7
frequency(0~Fmax(unit:0.01Hz))
receiving
7:Electromotion torque upper limit (0~3000,1000
PZD8
corresponds to 100.0%of the rated current of the motor)
receiving
8:Braking torque upper limit (0~2000,1000 corresponds
PZD9
to 100.0% of the rated current of the motor)
receiving
9:Virtual input terminals command
PZD10
Range:0x000~0x1FF
receiving
10:Virtual output terminals command
PZD11
Range:0x00~0x0F
receiving
11:Voltage setting value(special for V/F separation)
(0~1000,1000 corresponds to 100.0% the rated voltage
of the motor)
PZD12
12:AO output set value 1
receiving
(-1000~1000,1000 corresponds to 100.0%)
13:AO output set value 2
Value
0 Heartbeat disable
Name
299
www.barghmaher.ir
Appendix A
State/Description
Function selection
0
0
0
0
0
0
0
0
0
0
0