Siemens SINUMERIK Commissioning Manual page 716

Backing up and restoring data
4.3 Operating the service PC or the PG on the network
4. Select "Permissions" and activate the "Change" square for all the users in the "Allow"
Procedure on the PCU 50.3
The following steps must be carried out on the PCU:
1. Start the ServiceCenter with "Start Backup/Restore console".
2. Maintain the pre-setting of the "Network Options" on the PCU:
1. In the ServiceCenter, select the service task "Backup/Restore a Disk Image".
2. Establish a network connection to the released directory, e.g. \\SIEMENS-
3. Restore the hard disk of the PCU using the ghost image.
Note
If the transfer is interrupted during the "Restore" process, no consistent system is
available on the hard disk, i.e. the "Restore" process cannot be repeated because the
PCU no longer boots up.
In this event, the "Emergency Boot System" on the USB memory store is used.
See also
How to backup and restore the hard disk (Page 67)
How to create a service system for PCU (Page 61)
76
column so that files can be saved in this directory (e.g. the ghost image).
IP address of PCU:
IP address of PG/PC:
ABC4711\PCU_Backup.
192.168.214.241 with subnet screen form 255.255.255.0
192.168.214.250 with subnet screen form 255.255.255.0
Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0
PCU-Basesoftware (IM8)