Siemens SINUMERIK Commissioning Manual page 476

Programming support
3.3 Activating a dialog from the NC program
3.3.6 Example 4: Positioning of input/output field
Description
By specifying position parameters in the COM file, you can insert the comment field, or input
and output field, at any point in the display area.
Selecting
N15 MMC("CYCLES,PICTURE_ON, T_SK.COM; Screen2,GUD4.DEF,,,C1","S")
N20 TEST_3 = 5
N30 MMC("CYCLES,PICTURE_OFF","N")
N40 M30
Parameters:
The two parameters each consist of three numerical values; these specify the position and
length of the field. The values are specified in Twips, with 15 Twips roughly corresponding to
one pixel. The field height is defined as being 250 Twips.
Dialog file (*.COM)
Meaning of values:
(./6000,2800,8000/....)
3-12
//C2(Screen12)
(R///Var.Name/R/TEST_3/6000,2800,8000/200,3000,750
0)
/6000,2800,8000 Position of the comment field
/200,3000,7500
Position of input/output field
First value = 0 → Automatic positioning to default setting
No details → Positioning as on PCU 20 (default setting)
6000
2800
8000
Distance from left border
Distance from upper border
Field length
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Expanding the user interface