Siemens SINUMERIK Commissioning Manual page 175

Tool management
6.1 Setting tool management parameters on the HMI
6.1.1 How to create a real magazine
Creating real magazines
In this screen, magazines are defined with the appropriate data or displayed with existing
data.
Figure 6-1
Magazines
Name
Display text
Number
Type
Locations
Number of columns
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Start-up: Magazines
Enter a new name or select an existing name for the real magazine.
Language-dependent name of the magazine
Display of the current magazine number
Selection of a magazine type (chain magazine, revolver, box-type magazine)
Enter or display the number of magazine locations.
The "number of columns" is required for considering adjacent location and is
only relevant for box-type magazines.
6
169