Siemens SINUMERIK Commissioning Manual page 471

3.3.2 Example of MMC instruction
MMC instruction in the parts program
MMC("CYCLES,PICTURE_ON,T_SK.COM,PICTURE1,MGUD.DEF,PICTURE3.BMP,
TEST_1,A1","S")
CYCLES
PICTURE_ON
T_SK.COM
PICTURE1
MGUD.DEF
PICTURE3.BMP
TEST_1
A1
S
User variables in definition directory
%_N_UGUD_DEF
;$PATH=/_N_DEF_DIR
DEF CHAN REAL TEST_1
CHAN
REAL
TEST_1
Dialog screen file in the cycles directory (*.COM)
//C3(Screen2)
R/ 15
R
15
5
COMMENT, %1 %2 %3
W,RJ
TEST_1
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Operating area
Select dialog
File name in cycle directory
Name of the dialog
User data definition file
Name of graphics file (HMI Advanced only)
Acknowledgment variable (HMI Advanced only)
or display time in "N" mode
Screen header or comment from a text variable (COM file)
Acknowledgment mode: Synchronized
Applicable channel
Data type
Name of user variable
75 / 5 /COMMENT, %1 %2 %3/ W,RJ / TEST_1 / ...
Variable Type: Real, Integer or String
75 Permissible range: 15 to 75
Default setting for user variable
Comment text with optional text variables
Access
type:
User variable
3.3 Activating a dialog from the NC program
W = Read and write
R = Read-only
W, RJ = Read and write with comment
J = Right-justified in relation to input/output field
<without> = Left-justified in relation to input/output
field
Programming support
3-7