Siemens SINUMERIK Commissioning Manual page 520

Configuring environment
6.2 Creating configuration data
Entry points in the operating areas
Operating area
MACHINE
PARAMETER
PROGRAM
SERVICES
DIAGNOSIS
IBN
The file names listed in chapter "Table of start softkeys" are already stored as default
settings. However, the matching files must be created on the NC or HMI by the user.
See also
List of start softkeys (Page A-1)
6.2.4 Language-dependent text
Overview
The language-dependent texts for dialogs are stored in ASCII text files. The syntax is the
same as that of an alarm text file .
Language-dependent texts can be used for:
● Softkey labels
● Headings
● Help texts
● Any other texts
6-6
SCxxx Output dialog
SC101 MACHINE JOG
SC111 MACHINE MDA
SC122 MACHINE AUTO
SC207 Main screen of PARAMETERS
SC308 Main screen of PROGRAM
SC312 1. softkey line of the editor
SC313 1. softkey line of the editor
SC314 1. softkey line of the editor
SC315 1. softkey line of the editor
SC316 1. softkey line of the editor
SC326 2. Softkey menu of the editor
SC327 2. Softkey menu of the editor
SC407 Main screen of SERVICES
SC507 Main screen of DIAGNOSIS
SC607 Main screen of START-UP
SC616 2. Softkey menu of the editor
SC617 2. Softkey menu of the editor
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Horizontal SK 1
Horizontal SK 1
Horizontal SK 2
Horizontal SK 7
Horizontal SK 8
Horizontal SK 2
Horizontal SK 3
Horizontal SK 4
Horizontal SK 5
Horizontal SK 6
Horizontal SK 6
Horizontal SK 7
Horizontal SK 7
Horizontal SK 7
Horizontal SK 7
Horizontal SK 6
Horizontal SK 7
Expanding the user interface