Siemens SINUMERIK Commissioning Manual page 470

Programming support
3.3 Activating a dialog from the NC program
Storage structure of graphics
*.bmp files are stored in resolution-specific subdirectories:
● For standard cycles:
● For user cycles:
● For manufacturer cycles:
3-6
GUD file
Graphics file
(HMI Advanced only)
Acknowledgment
variable (HMI
Advanced only)
or display time
Text variable
Acknowledgment
mode
\CST.DIR\HLP.DIR\640.DIR
\CST.DIR\HLP.DIR\800.DIR
\CST.DIR\HLP.DIR\1024.DIR
\CUS.DIR\HLP.DIR\640.DIR
\CUS.DIR\HLP.DIR\800.DIR
\CUS.DIR\HLP.DIR\1024.DIR
\CMA.DIR\HLP.DIR\640.DIR
\CMA.DIR\HLP.DIR\800.DIR
\CMA.DIR\HLP.DIR\1024.DIR
User-data definition file accessed on
reading/writing of variables.
File name of the BMP graphic to be inserted
Acknowledgment in acknowledgment mode "A"
variable
in acknowledgment mode "N"
Display time
Screen header or comment text from a text
variable in the COM file.
"S" for Synchronous
"A" for Asynchronous
"N" for No Quit
For 640 dpi resolution
For 800 dpi resolution
For 1024 dpi resolution
For 640 dpi resolution
For 800 dpi resolution
For 1024 dpi resolution
For 640 dpi resolution
For 800 dpi resolution
For 1024 dpi resolution
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Acknowledgment via "OK"
softkey
Acknowledgment via
configured softkeys
No acknowledgment, but
display time
Expanding the user interface