Siemens SINUMERIK Commissioning Manual page 350

Sinumerik 840di sl/840d sl/840dbase software and hmi advanced
Hide thumbs Also See for SINUMERIK:
Table of Contents

Advertisement

Scope of performance
4. Initiate operations in response to the following actions:
5. Data exchange between dialogs
6. Variables
7. Execute functions:
8. Apply protection levels according to user classes
Supplementary Conditions
The following conditions must be met:
● It is only possible to switch between dialogs within one HMI operating area.
● In the case of HMI Advanced, user, setting and machine data are initialized on request.
● User variables may not have the same names as system or PLC variables.
● The dialogs activated by the PLC form a separate operating area for HMI Advanced
See also:
You can find details of the configuration files in the chapter "Configuring environment".
1-2
– Insert, exchange and delete display texts (language-dependent or independent)
– Insert, exchange and delete graphics
– Displaying dialogs
– Input values (variables)
– Select a softkey
– Exiting dialogs
– Read (NC, PLC and user variables)
– Write (NC, PLC and user variables)
– Combine with mathematical, comparison or logic operators
– Subroutines
– File functions
– PI services
– External functions (HMI Advanced)
(similar to measuring cycle displays).
Note
The programming support functions described in the chapter of the same name and the
user interfaces for Siemens cycles have been created with the system tools for Expand
user interface. As a result, they can be modified as required by the machine manufacturer
or end user within the scope described in this chapter.
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Expanding the user interface

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents