Siemens SINUMERIK Commissioning Manual page 676

Configuring the system
2.1 System settings
Proceed as follows
To add the PCU to a domain:
1. Select: "Start" → "Settings" → "Control Panel" → "System", "Computer Name" tab.
2. Click "Change ...".
3. Enter the name of the domain to which you want to add the PCU.
4. You will then be asked to log on as a user with the corresponding entitlement to conclude
36
Default: The PCU belongs to a "WORKGROUP" and is not assigned to any domain.
The following dialog opens:
Figure 2-2 Add PCU to domain
the process.
Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0
PCU-Basesoftware (IM8)