Siemens SINUMERIK Commissioning Manual page 41

x y
Setup State=50
IBSetup <root>
Simulation <root>
Other interfaces in the standard applications
The following standard applications can be addressed with these:
● Parameters
● Diagnostics
● Commissioning
The following commands should be noted to the right of the equals sign in the softkey
command definition:
HSK<SoftkeyIndex>Command=Command1; Command2; ...
or
VSK<SoftkeyIndex>Command=Command1; Command2; ...
A semi-colon is used as a separator between multiple commands.
Example:
; Hide some softkeys in the horizontal softkey bar for standard operation
HSK1Command=DisableHSK(1, 3-4)
Commands
DisableHSK(<
The horizontal softkeys are removed from the
separated by commas or specified using softkey ranges <
DisableHSK(1,3,5-7).
Note
The softkeys in the ETC bar cannot be removed.
DisableVSK(<
The vertical softkeys are removed from the
by commas or specified using softkey ranges <
DoVSK=<
The action of the vertical softkey (1-8) is initiated.
Recall(<
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Explanation
Entry into the Drive overview screen in Start-up with recall on exiting the level. The softkey
Drives/Servo
text is .
Entry into the Settings (task 34) main screen with recall to the highest level for return.
System settings
The softkey text is
Entry into the Simulation (task 27). A modal dialog is displayed, which you can use to
select the program to be simulated. The simulation is exited by pressing Cancel. The
Simulation
softkey text is
softkey list
>)
softkey list
>)
SoftkeyIndex
>
status list
>)
.
.
softkey list
softkey list
. Individual softkeys can be separated
from
> - <
Configuring the HMI system
2.1 Processing INI files
. Individual softkeys can be
from to
> - < >, e.g.
to
>, e.g. DisableHSK(1,3,5-7).
35