Siemens SINUMERIK Commissioning Manual page 68

Configuring the HMI system
2.2 Configuring a channel menu
[CH_GRP_3]
Text = Transport
Member1.Target = NCU720-1.#1
Member1.Text = NCU720_K1
Member2.Target = NCU720-1.#2
Member2.Text = NCU720_K2
Member3.Target = NCU720-1.#3
Member3.Text = NCU720_K3
Member4.Target = NCU720-1.#4
Member4.Text = NCU720_K4
...
[CH_GRP_15]
Text = Headend
Member1.Target = 192.168.214.241.#1
Member1.Text = NCU720_K1
Member2.Target = 192.168.214.241.#2
Member2.Text = NCU720_K2
Member3.Target = 192.168.214.241.#3
Member3.Text = NCU720_K3
Member4.Target = 192.168.214.241.#4
Member4.Text = NCU720_K4
Configuration for an operating station
The channel menu for an operating station is configured in its file CONFIG.INI in section
[T2M2N]. There the channel groups to be used for the operating station as defined in file
NETNAMES.INI are assigned to the horizontal softkeys of the channel menu for this
operating station.
62
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)