Siemens SINUMERIK Commissioning Manual page 147

5.3 Displaying versions
Overview
The version data displayed under "NCU Version" state the software versions on the CF card.
This especially applies to measurement cycles and cycle versions.
● Version data, NCU
● Version data, HMI files
● Version data, cycles
● Version data, definitions
The measurement cycles and cycles that are used by HMI-Advanced are available on the
hard disk of the PCU. Their version can be queried via the horizontal softkeys.
With the "Detail" softkey, you can query further information about a version, for example, to
pass it on to hotline support personnel if service is required.
Figure 5-3
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
NCU version (example)
Diagnostics and service
5.3 Displaying versions
141