Siemens SINUMERIK Commissioning Manual page 626

Input of Text
3.6 Language properties in Word files
Setting the language property
Proceed as follows to set the language property for a text:
1. Highlight the part of the text for which you wish to set the language property, or press
2. Then select the command "Extras" → "Language" → "Set Language...".
3. In the "Language" dialog box you can choose the correct language. Click "OK" when you
Quick setting of the language property
In Word, you can insert a combined display and selection box into a symbol bar. This both
displays the current language property and enables you to set the language as well.
Proceed as follows to insert this field into a symbol bar:
1. In the "Extras" menu, select the command "Customize..."
2. In the "Customize" dialog box select the "Commands" tab.
3. Select "Tools" from the list of categories on the left.
4. Then select "Language" from the list of commands on the right (see Fig.).
5. Drag and drop this entry with the left mouse button into a symbol bar.
6. Close the dialog box.
With this selection box, you can then change the selected language for any part of the text.
28
CTRL+A to select the entire text.
are done.
Generating target language texts (TX2)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0