Siemens SINUMERIK Commissioning Manual page 408

Programming
2.5 Softkey menus
2.5.3 Changing softkey properties during runtime
Description
The softkey properties Text, Access Level and Status can be changed in the methods during
runtime.
Programming
Syntax:
Description:
Parameters:
Example
//S(Start)
HS7=("Example", ac7, se1)
PRESS(HS7)
LM("Screen form3")
END_PRESS
//END
//M(Screen form3/"Example 3 : Graphics and
softkeys"/"MST.BMP")
HS1=("")
HS2=("")
HS3=("")
HS4=("")
HS5=("")
HS6=("")
HS7=("")
HS8=("")
VS1=("")
VS2=("")
2-58
SK.st = "Text""
SK.ac = Access level
SK.se = Status
Assigns properties
Text
Access level
Status 1:
2:
3:
;Softkey with label
;Softkey with security level
; Softkey with status
Label text in inverted commas
Range of values: 0...7
visible and operator-controllable
disabled (gray text)
displayed (last softkey used)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Expanding the user interface