Siemens SINUMERIK Commissioning Manual page 485

You can find more information about HK7 and HK8 in the chapter "Configuring <M> key and
<MENU SELECT> as HK7, HK8".
Note
Hotkeys 1 and 7 (<M> key) cannot be distinguished by the hardware on the OP 10S
("Position" labeling). Hot key 7 is always triggered when one of the keys is pressed. If HK1 is
configured, this event can only be triggered by an external (MF2) keyboard.
Hotkey assignment on the MF2 keyboard
Hotkey
HK1
HK2
HK3
HK4
HK5
HK6
HK7
HK8
*) Key is located on numeric keypad: <NumLock> must be off.
4.1.2 Functions of the keys on delivery
Delivery condition
On delivery of the system, the assignment of hotkeys to functions is entered in the KEYS.INI
file.
With HMI Advanced, the file can exist in various directories:
● user
● oem
● add_on *)
● mmc0w32 *)
● mmc2 *)
● hmi_adv *)
*) These directories are reserved for Siemens.
The files are executed in the above sequence. Entries in the directory, which appears at the
beginning of the sequence will disable existing entries in directories, which appear later in
the sequence.
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
OP label
Position
Program
Offset
Prg.Manager
Alarm
Custom
M Machine
Menu Select
Configure hotkeys and PLC keys
Key on MF2
<SHIFT+F11>
<END> (NB)*
<Page Down> (NB)*
<Home> (NB)*
<Page Up> (NB)*
<SHIFT+F12> or Cursor Down (NB)*
<SHIFT+F10>
<F10>
4.1 Introduction
4-3