Siemens SINUMERIK Commissioning Manual page 519

Example of COMMON.COM
[MMC_DOS]
sc101=tooth.com
sc111=mda.com
sc122=auto.com
sc207=param.com
sc314=aeditor.com
sc315=aeditor.com
sc316=aeditor.com
sc407=dienste.com
sc507=diagnose.com
sc607=inbetrn.com
sc826=cmm.com
sc857=cmm.com
sc858=cmm.com
sc867=cmm.com
CHK_COMMON.COM=1
LOGSIZE=30
[PLC_SELECT]
PC1= CYC82, drilling.com
PC2= CYCLE90, millthre.com
6.2.3 Configuring start softkeys
Overview
The start softkeys named here can be used to activate the associated configuration files.
The possible start softkeys for dialogs are predefined. Additional start softkeys are not
possible. Start softkeys are specific to operating areas.
Programming
Syntax
Identifier
Parameter
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
File
SCxxx =
Softkey connection: Connection between softkey and configuration file
"xxx" represents an internal softkey identity of the start softkey.
File
Name of configuration file
6.2 Creating configuration data
; MACHINE
; The files are stored on the flash memory of
the HMI.
; PARAMETER
; PROGRAM, Editor
; SERVICES
; DIAGNOSIS
; STARTUP
; ShopMill, Machine, AUTO
; Messages / alarms
; Tools, WO
; Rapid execution of the HMI
; Size of the error log (LOG file) 30 KB
; Notification of displays, which can be called
by the PLC
; Fig. 1:
; Fig. 2:
Configuring environment
6-5