Siemens SINUMERIK Commissioning Manual page 501

4.5 List of selectable states
4.5
4.5.1 Selectable states in HMI Advanced
Overview
In general, the following conditions apply to all tasks in HMI Advanced:
No configuration:
Configuration with 0:
"Machine" operating area
In the Machine operating area, the status is always dependent on the status of the machine
(AUTO, MDA, JOG, REF). The following can be selected via the PLC key:
● The main screen for the relevant mode
● The main actual value screens for each mode (softkey vertical 6)
● Possibly still in JOG / MDA
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
State BAG
0 JOG
0 JOG
0 JOG
0 MDI
0 MDI
0 MDI
0 AUTO
State BAG
10 JOG
20 MDI
30 AUTO
Switching between the WCS and MCS is possible via the PLC.
State BAG
60 JOG
70 JOG
80 MDI
Maintains current state.
The basic state of an operating area is activated.
Machine function
REF
none
REPOS
none
TEACH
REF
none
Machine function
none
none
none
Machine function
none
none
none
Configure hotkeys and PLC keys
4.5 List of selectable states
Display
JOG/REF main screen
JOG main screen
REPOS main screen
MDA start screen
MDA/Teach main screen
MDA/REF main screen
Auto main screen
Display
Zoom actual values JOG
Zoom actual values MDA
Zoom actual values Auto
Display
Handwheel selection JOG
Increment selection JOG
Handwheel selection MDA
4-19