Siemens SINUMERIK Commissioning Manual page 169

5.7.3 Analyzing INI Files
System → Files
All entries of the analyzed INI files are displayed here.
HMI
Additional files
System → Hardware Resources
Hardware
Memory
Used Memory:
Physical Memory, total:
Physical Memory, available:
Page File, total :
Page File, available:
Virtual Memory, total:
Virtual Memory, available:
System → Software Environment
Running Tasks
The following columns are displayed:
Name
Running
ProcessID
WorkingSetSize
DiffWorkingSetSize
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Display of the corresponding INI entries from files that are subject to the
INI concept of HMI-Advanced. The directory from which the entry comes
is also displayed ("Source" column). For this, all the directories that are
entered under HMI_DIRS in HMIAnalyzer.ini are scanned.
Display of the addition INI files that are not subject to the INI concept, i.e.
these INI files are only searched for in the specified path.
Under hardware, parts of the existing hardware are listed, e.g. information
on the processor and information on the individual hard disk partitions and
drives.
More precise information on the existing and available memory is
displayed here in KB:
Percent of allocated memory
Total size of the RAM
Free, available RAM memory
Total memory of the swap file
Free, available memory of the swap file
Total size of the virtual memory
Free, available virtual memory
The memory usage and the running of all active processes are
displayed here.
Name of the process
"X" process is running
'-' process was ended
Process ID
Current memory usage in kB
Modification of the memory since the start of the HMI Analyzer or since
the last reset
Diagnostics and service
5.7 HMI Analyzer
163