Siemens SINUMERIK Commissioning Manual page 292

List of the INI Files
A.9 HEADER.INI
[Pos15]
ChanStatFeedStopSpindleStop = 1 ;channel status, channel 1 is
displayed, superimposed
Spindles=1 ;from feed inhibit channel 1 and spindle inhibit
;of Spindle 1
[UserIcons]
;UI_0 = <name.bmp> , <Position> ;name of the icon, position
...
;UI_31 = <name.bmp> , <Position> ;name of the icon, position
;USER_ICON_BASE = DBxx.DBByy
;number of the data block with the
;double word for user icon
;yy start byte of the double word
[UserTextInfo]
;USER_TEXT_BASE = DBxx.DBByy
;xx data block with interface for
;user messages in the header
;yy start byte for interface
;TextLength=33 ; activate text limiting, if
;user texts are used.
[OemIcons]
;Oem_ICON_BASE=DBxx.DBByy
;OI_0= = <name.bmp> , <Position> ;name of the icon, position
...
;OI_31 = <name.bmp> , <Position> ;name of the icon, position
[OEMTextInfo]
;OEM_NUMBER_TEXTFIELD=3 ;There are a max. of 3 text fields per line,
i.e.
;a total of 6 text fields in two lines are possible. ;The output
length is restricted to max. 38 characters
;per line.
;OEM_TEXT_BASE=DBxx.DBByy
286
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)