Siemens SINUMERIK Commissioning Manual page 522

Configuring environment
6.3 Storage structure of configuration files
6.3 Storage structure of configuration files
6.3
6.3.1 HMI Embedded sl
Storage
In the Linux environment, the user configurations are copied to the /user/sinumerik/hmi/proj
directory (for "normal" user dialogs, i.e., everything except cycles support) on the CF card.
User configurations for user cycles support are copied to the /user/sinumerik/cycles/proj
directory on the CF card. All files are unpacked and copied to the relevant directory.
Similarly, the manufacturer configurations are copied to the /oem/sinumerik/.... directories.
Path
/card/oem/sinumerik/hmi/proj
/card/user/sinumerik/cycles/proj
/card/oem/sinumerik/cycles/proj
/card/oem/sinumerik/hmi/proj
/card/user/sinumerik/cycles/ico/icoxxx
/card/oem/sinumerik/cycles/ico/icoxxx
/card/user/sinumerik/hmi/ico/icoxxx
/card/oem/sinumerik/hmi/ico/icoxxx
/card/user/sinumerik/hmi/cfg
/card/oem/sinumerik/hmi/cfg
/card/user/sinumerik/hmi/ico/icoxxx
/card/oem/sinumerik/hmi/ico/icoxxx
/card/user/sinumerik/cycles/lng/xxx
/card/oem/sinumerik/cycles/lng/xxx
/card/user/sinumerik/hmi/lng/xxx
On delivery, three USB drives and access to the CF card are set up in the PROGRAM
operating area.
The following directory structure is set up on the USB memory:
\cycles
6-8
\cycles\proj (com files)
\cycles\prog (customer cycles (.spf))
\cycles\lng (Language directory – contains only subdirectories)
\cycles\lng\xxx (Language directory, e.g., ger, eng, etc. – one directory for
each language. The aluc.txt file for the relevant language is
stored here.)
Content
User configurations (com files for "normal" user
dialogs, i.e., everything except cycles support)
User configurations for user cycles support
Manufacturer configurations
Bitmaps
Ini files
Header icons
The relevant texts (aluc.txt or aluctx.s0x), where xxx
stands for the language
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Expanding the user interface