Siemens SINUMERIK Commissioning Manual page 324

List of the INI Files
A.23 SEDITOR.INI
;- You can use the ?-statement once per entry:
; L1? -> OK
; L1?? -> OK
; L23??? -> OK
; L2??3? -> NOT OK !!!
;*************************************************************
[MISC]
IconPath
Relative path to the directory in which the icons are stored.
The path is relative to ..\mmc2. The same directory can also be present in Add_on, oem, and
user. The icons are also searched for in these directories.
Default setting: IconPath = ae\skpicto
EndIcon
Icon for the last block. This icon must be located in the directory that was specified in
IconPath.
GCodeIcon
Icon for free DINCode. This icon must be located in the directory that was specified in
IconPath.
ShowBlockNumber
Display of line number (e.g. N210). The number of the first line of a block is always
displayed.
0: Line number is not displayed.
1: Line number is displayed.
TimeFormat
The displayed lines can be formatted in VB syntax, e.g. number of decimal places.
####0.000: Time display with 3 decimal places
CopySyncBuffers
For the synchronized view, you can specify here whether or not the empty blocks that were
inserted for synchronization will be copied.
0: Do not copy empty blocks.
1: Copy empty blocks.
[INSERT]
TemplateForNewBlock
Using the key combination CTRL+I, in the edit mode, a step of a SEFORM instruction can be
added. The text to be inserted can be configured here.
[Cache]
Enabled
A file can be opened faster by using the cache.
The individual data for the sequence view is stored separately and can be re-accessed,
provided the part program has not been changed.
318
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)