Siemens SINUMERIK Commissioning Manual page 326

List of the INI Files
A.23 SEDITOR.INI
;Definition of synchronization marks (search texts)
;sync1 = WAITM*(*n,*c,*c,*c,*c,*c,*c,*c,*c,*c,*c)
; '#' : separator: text before is searched in one
; channel, text behind in all others.
; It isn't possible to synchronize this kind of
; synchronization mark!!!
; '*n': identifier for synchronization numbers
; WAITM(*n,1,2,3)
; '*c': channel WAITM(1,*c,*c,*c), if own channel
; is missing, it will be added like WAITM-strategy
;
; Add additional/language-dependent text:
; WAITM*(*n,*c,*c,*c,*c,*c,*c,*c,*c,*c,*c) "$85000 The Text"
;
;sync1_Ico = clock.bmp
; belonging icon for defined sync mark
;sync1_Chans = 1,2,4
; Project the channels to synchronize here
; e.g.: you have an M-function (M4711)
; to synchronize the channels 1, 2 and 4
; Then you can write here: syncX=1,2,4
; If you synchronize the part programs the
; channel 3 will not be considered.
; If you don't project anything here, in all
; channels must stand the M4711 call
; respective if there are *C in [SyncMarks]
; only these channels will be synchronized.
;SIEMENS
[SyncMarks_Siemens]
sync1 = WAITM*(*n,*c,*c,*c,*c,*c,*c,*c,*c,*c,*c)
sync1_Ico = clock.bmp
sync1_Chans =
;USER
[SyncMarks_User]
sync1
Definition of search text. The following syntax applies:
* space holder; text in '*' must be the same in all channels.
n identification using a number e.g. WAITM(*n,1,2,3)
Wait marks can be assigned using this number.
*c Channel numbers, these do not have to be in the same order,
the user's own channel does not have to be specified
(e.g.: WAITM(1,*c,*c,*c).
# Channel separator character: Text in front of the separator
character is
searched for in a channel, the text is then searched in all others.
These synchronization marks
cannot be synchronized with one another.
sync1_Ico
Associated icon, it must be located in the directory that was specified in IconPath.
sync1_Chans
Here, it can be specified whether the associated synchronization marks will be searched for
in certain channels only. If no entry is made, the search will be carried out in all channels or
in those that are specified if *c was configured.
320
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)