Siemens SINUMERIK Commissioning Manual page 486

Configure hotkeys and PLC keys
4.2 Configuration
On delivery, the assignments for HK1 to HK6 are stored in KEYS.INI in the mmc2 directory
for the standard system:
Key
HK1
HK2
HK3
HK4
HK5
HK6
The assignment for ShopMill/ShopTurn applications is as follows:
Key
HK1
HK2
HK3
HK4
HK5
HK6
4.2 Configuration
4.2
4.2.1 Configuration overview
Overview
Below is a schematic diagram illustrating the associations between configured OP hotkeys
and PLC keys and the "Expand user interface" configuration:
4-4
Position
Program
Offset
Prg. manager
Alarm
Custom
Position
Program
Offset
Prg. manager
Alarm
Custom
Function
Machine operating area, last screen
Program operating area, last screen
Parameters operating area, last screen
Main screen programming
Diagnosis operating area, alarm screen
Default Custom operating area, last screen
(user interface configured by the user)
Function
Machine operating area, last screen
Program editor, last status
Offset area, last status
Program directory, last status
Diagnosis operating area, alarm screen
Default Custom operating area, last screen
(user interface configured by the user)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Expanding the user interface