Siemens SINUMERIK Commissioning Manual page 539

Name
$AC_MARKER[x]
$AC_MEA
$AC_OVR
$AC_PARAM[x]
$AC_PATHN
$AC_PLTBB
$AC_PLTEB
$AC_PRESET[x]
$AC_PROG
$AC_RETPOINT[x]
$AC_SDIR[x]
$AC_SMODE[x]
$AC_STAT
$AC_TIME
$AC_TIMES
$AC_TIMEC
$AC_TIMESC
$AC_TIMER[x]
$AC_VACTB
$AC_VACTW
$AC_VC
$AN_AXCTAS[n]
$AN_AXCTSWA[CTn]
$AN_ESR_TRIGGER
$AN_MARKER[x]
$MC_DISPLAY_AXIS
$MC_DISPLAY_AXIS
$MC_MM_NUM_BASE_FRAMES
$MN_EXTERN_LANGUAGE
$MN_EXTERN_CNC_SYSTEM
$MN_MAX_CUTTING_EDGE_NO
$MN_MAX_CUTTING_EDGE_
PER_TOOL
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Index
x=MarkerNo
x=ParameterNo
x=Axis
x=Axis
x=SpindleNo
x=SpindleNo
x=TimerNo
CTn=Axis container no.
x=MarkerNo
Bits 16 -31
Bits 0 -15
and
A.3 List of accessible system variables
Description
Counter for motion synchronous actions
Probe has responded
Path override for synchronous actions
Dyn. parameter for motion synchronization
Normalized path parameter
Distance from start of block in basic coordinate
system
Distance from block end in basic coordinate
system
PRESET value
Program status
Return position on contour for repositioning
Rotat. status
Spindle mode
Channel status
Time from the start of the block in seconds
(including the times for the internally generated
intermediate blocks)
Time from the start of the block in seconds
(without times for the internally generated
intermediate blocks)
Time from the start of the block in interpolation
clock cycles (including clock cycles for the
internally generated intermediate blocks)
Time from the start of the block in interpolation
clock cycles (without the clock cycles for
internally generated intermediate blocks)
Timer location in seconds
Interpolation feedrate, setpoint
Path velocity in WCS
Additive path feed correction for synchronous
actions
Actual axis container address (rotary position)
Axis container rotation active
ESR start signal
Marker variable for motion synchronous actions
Machine axis identifier
Identifier for geometry/auxiliary axis
Number of base frames in channel
CNC system language
Max. value D number
Max. number of edges per tool
Appendix
A
A-11